User Manual

All important data
at a glance
Switching/dimming actuator N 536D
• One relay contact per output as
a switching element
• Contact rated current voltage
AC 230 V
• Contact rated frequency
50 / 60 Hz
• A control voltage output of DC...10
V per channel for the control of
dimmable electronic control gear
• Manual control function for each
channel on the device for switching
and dimming and activating direct
operation
• Maintenance-free terminals for
connecting and looping through
solid, stranded, and fine-stranded
conductors, 0.5 to 2.5 mm
2
• At least one phase connection
terminal per output
• Operation of electronics via bus
voltage
• Integrated bus coupler, bus connec-
tion via bus terminal block
• Red LED for displaying the activation
of address mode and readiness for
operation
• Housing Plastic; color:
RAL 7035 (light gray); N-dimension
• DIN rail-mounted device for installa-
tion on rail TH35 DIN EN 60715
• Protection type: IP 20
• Switching construction site function
• Object for monitoring device
functionality
• Object for targeted call-up of status
values
Control functions
• Selectable operating mode: normal
mode, 1- or 2-level timer mode,
flashing
• Configurable control value input for
ON/OFF switching depending on
threshold values
• Configurable on/off switch delay
• Central switching with separately
configurable on/off delay
• Logic operations (AND, OR, NOT
AND, EXCLUSIVE OR, NOT OR,
FILTER, TRIGGER)
• Switching the output on/off via
dimming brighter/darker
• Dimming curves for optimization of
dimming behavior of lamps configu-
rable
• Maximum and minimum dimming
values configurable via parameters
and object
– night mode object for time-limited
switching on of the output at
night can be added
• Retriggering of ON time (ON time
extension) during timer mode up to
a configurable maximum extension
with repeated (2x, 3x, 4x, 5x)
retriggering
• Integrated 8-bit scene control with
up to 8 scene assignments per
output
• Configurable switching state for bus
voltage failure and starting value of
the switching object for when bus
voltage is recovered
• Addable night mode object for
time-limited switch-on of the
output, i.e., the lighting
Override functions
• Manual override ON
• Permanent OFF
• Lock mode
• Central override
• Forced switch-on/off
Diagnostic functions:
• Counting of operating hours with
threshold monitoring
• Counting of switching cycles with
threshold monitoring
• Status messages
Shared
characteristics
Functions
per device
Type Design OC Order no. PE
(ST, SZ, M)
PKG/
VPE
PG Price
(€)
N 536D31 Switching/dimming actuator 4 x AC 230 V, 10 AX,
1…10 V
A 5WG1536-1DB31 1 1
N 536D51 Switching/dimming actuator 8 x AC 230 V, 10 AX,
1…10 V
A 5WG1536-1DB51 1 1