User Manual

Order overview 4

Technical data 5

Integrated constant lighting control with DALI-sensors 6

Installation checklist for KNX/DALI Gateways 7

Device operation 8

Practical tips 9

Replace a defective DALI ECG without ETS 10

Replace multiple defective DALI ECGs without ETS 11

Configuration steps in the office “offline” 12

Configuration steps in the installation “online” 13

Topology 14

Standby switch-off 16

Energy savings by standby switch-off 17

Individual light adjustment with Tunable White 18

“Human Centric Lighting” application 19

Simple DALI lighting in normal mode 20

Simple DALI lighting in emergency operation 21

Intelligent DALI lighting in normal mode 22

Intelligent DALI lighting in emergency operation 23

Emergency lighting with single battery 24

Saving emergency lighting test and test results in Twin plus and plus 25

Usability 26

Commissioning constant lighting control 28

DALI sensors by Osram 29

Practical tips 30

Diagnostic overview 34

Contact and support 35

What to do in case of “Undefined ECG”? 36

Change the short address of ECG 37

The KNX/DALI Gateways from Siemens from

the GAMMA product portfolio control modern

lighting systems efficiently and conveniently.

As a DALI master controller, the three current

KNX/DALI Gateways offer comprehensive

functions for controlling DALI devices, such

as ECGs, transformers or LED converters.

This Pocket Guide gives an overview of the planning,

installation, commissioning and diagnosis of a KNX/

DALI Gateway. As well as instructions, the Pocket

Guide also offers helpful practical tips.

These devices are compatible with DALI Version 1

and DALI-2 ECGs.

Content