Installation Instructions

Document No. 565-205
Installation Instructions
November 30, 2009
1. Disconnect the American Auto-Matrix PUP
devices from the American Auto-Matrix SAGE
panel.
2. Connect the American Auto-Matrix PUP Driver
to the American Auto-Matrix PUP devices per
diagram in Figure 1.
DRIVER
+
-
S
+
-
REF
+-S
American Auto-Matrix
PUP Devices
GX
DX
VAV
GC
MC
etc...
To Other
PUP Devices
GW1459R1
FLN
Figure 1. Connecting the American Auto-Matrix PUP Driver to the American Auto-Matrix Device.
Information in this document is based on specif cations believed correct at the time of publication. The right is reserved to make changes as
design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners.
© 2009 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division Your feedback is important to us. If you have Document No. 565-205
1000
Deerfield Parkway comments about this document, send them to Country of Origin: USA
Buffalo Grove, IL 60089-4513 [e-mail].
Page 2 of 2
U.S.A.