Manualshelf

Installation Instructions

ManualsBrandsSiemens Manuals3rd party integrationAndover Infinet Driver on the PXC Modular Platform, Technical Specification Sheet
12
Installation Instructions
Document No. 565-709
December 1, 2006
Andover Infine
tDriver
These installation instructions only cover t he
connection of the Andover Infinet Driver to the
Andover system. For hardware installation of the
Modular Equipment Controller, see document number
565-570. For hardware installatio n of the Power
Open Processor, see document number 565-571.
Product Description
The Andover Infinet Driver enables communication
between the APOGEE
®
Automation System and the
Andover network.
Product Numbers
986-88301A
Andover Infinet Driver, Open
Processor with RS-485 ALN
986-88301B
Andover I
nfinet Driver, Open
Processo
r with Etherne t ALN
986-88301C Andover Infinet Driver, MEC
with RS-485 ALN, 8DI, 8DO,
8AI, 8AO , point expan sion
support, HOA-ready
986-88301D
Andover Infinet Driver, MEC
with RS-485 ALN, 8DI, 8DO,
8AI, 8AO , point expan sion
support, with HOA
986-883
01E
Andover Infinet Driver, MEC
with RS-485 ALN, 8DI, 8DO,
8AI, 8AO , point expan sion
support, modem , HOA-ready
986-88301F
Andover Infinet Driver, MEC
with RS-485 ALN, 8DI, 8DO,
8AI, 8AO , point expan sion
support, modem , with HOA
986-88301G Andover Infinet Driver, MEC
with Ethernet ALN, 8DI, 8DO,
8AI, 8AO , point expan sion
support, HOA-ready
986-88301H
Andove
rInfinet Driver, MEC
with Et
hernet ALN, 8DI, 8DO,
8AI, 8A
O, point expansion
suppor
t, with HOA
Warning/Caution Notations
WARNING:
Personal injury/loss of life may occur if you
do not follow the procedures as specified.
CAUTION:
Equipment d
amage or loss of data may
occur if you
do not follow the procedures
as specified
.
Expected I
nstallation Times
30 minutes.
Required Tools and Materials
• Flat-blade screwdriver (1/8-inch blade width).
• Wire strip
pers.
• Cabling and connectors. See the Connecting
the Andover Infinet Driver to the Andover
Network section.
CAUTION:
Always wear an electro-static discharge
wrist strap and discharge accumulated
static before touching field panel
components.
Prerequisites
• Driver h ardware is insta lled accordin g to its
respective installation instructions.
•FLNTerm
ination blo cks installed, if any.
Depending on the type of installation, other
prerequisites may have to be completed.
I
tem Number: 56 5-7 09, R ev. AA
P
age 1 of 2

Summary of content (2 pages)