Installation Instructions

Document No. 565-709
Installation Inst ructions
December 1, 2006
Connecting the Andover Infinet
Driver to the Andover Network
Follow these steps to connect the Andover Infinet
Driver to the Andover network:
1. Make cables per d iagram in Figure 1.
2. Connect cables per diagram in Figure 1.
DRIVER
+
-
S
+
-
SHLD
+-S
Infinet/Infinet II Device
(6xx, 8xx, 9xx)
To Other
Infinet/Infinet II
Devices
GW1400R1
FLN 1
Figure 1. Connecting the Andover Infinet Driver to the Andover Network.
Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as
design improveme nts are introd uced. Product or company names mentioned herein may be the trademarks of their respective owners.
© 2006 Siemens Building Technologies, Inc.
Siemens Building Technologies, Inc. Your feedback is important to us. If you have Document No. 565-709
1000 Deerfield Parkway comments about this document, please send Country of Origin: US
Buffalo Grove, IL 60089-4513 them to [e-mail].
Page 2 of 2
U.S.A.