Installation Instructions

Installation Instructions
Document No. 565-906
August 15, 2009
Barber-Colma
n Network 8000 Enhanced Driver
These installatio n instructio n s only cover the
connection of the Barber-Colman Network 8000
Enhanced Driver to the Barber-Colman system.
For hardware installat ion o f the Mo du la r Equipment
Controller, see document number 565-570. For
hardware installation of the Power Open Proces so r,
see document number 565-571.
Product Description
The Barber-
Colman Network 8000 Enhanced Driver
enables co
mmunic at ion between the APOGEE
®
Automatio
n System and the Barber-Colman system.
This is don
e by removing t he Barber-Colma n G C M
and replac
ing it with the Barber-Colman Network
8000 Enha
nced Driver, allowing the driver to co nt ro l
the Barbe
r-Colman ASD bus.
LCM block function ality and LCM bus
integration are not supported with the
Barber-Colman Network 8000 Enhanced
Driver.
Product Numbers
986-883
08E
Barber-Colman Network 8000
Enhanced Driver, MEC with
RS-485 AL N, 8DI, 8DO, 8AI, 8AO ,
point expansion support, mod em,
HOA-ready
986-88308G Barber-Colman Network 8000
Enhanced Driver, MEC with Ethernet
ALN, 8 DI, 8DO, 8AI, 8AO, point
expansion sup port, HOA-read y
986-88308L
Barber-Colman Network 8000
Enhanced Driver, MEC with
BACnet/IP ALN, 8DI, 8DO, 8AI,
8AO, point expansion support,
HOA-ready
Warning/Caution Notations
WARNING:
Personal injury/loss of life may occur if you
do no t follow the procedures as specified.
CAUTION:
Equipment damage or loss of data may
occur if you do no t follow the procedures
as specified.
Expected Installation Times
7 minutes.
Required T
ools and Materials
• Flat-blade screwdriver (1/8-inch blade width).
• Wire strippers.
• Cabling an
d connectors. See the Connecting
the Barber
-Colman Network 8000 Enhanced
Driver to t
he Barber-Colman System section.
CAUTION:
Always we
ar an electro-static discharge
wrist str
ap and discharge a ccumulated
static be
fore touching field panel
componen
ts.
Prerequ
isites
• Driver hardware is installed according t o its
respective insta llation instructions.
• FLN Termination blo ck s installed, if any.
Dependi
ng on the type of installation , other
prerequ
isites may have to be completed.
I
tem Number: 5 65-906, Rev. EA
P
age 1 of 2