Installation Instructions

Installation Instructions
Document No. 565-711
August 2, 2013
BACnet Driver for PXC Modular and PXC-36
1
Item Number 565-711(EA)
These installation instructions cover the connection of
the BACnet Driver to the BACnet system only.
 For hardware installation of the PXC Modular, see
the
PXC Modular Series Installation Instructions
(553-638).
 For hardware installation of the PXC-36, see the
PXC Compact 36 Installation Instructions (553-
504).
Product Description
The BACnet Driver enables communication between
the APOGEE® Automation System and the BACnet
system.
Product Numbers
License
LSM-INT-BMSTP
License to enable the BACnet Driver
on PXC Modular or PXC-36 hardware.
PXC Modular Series
PXC00-PE96.A
PXC Modular, Ethernet or RS-485
ALN, 96 FLN nodes
PXC00-E96.A
PXC Modular, BACnet/IP or MS/TP
ALN, 96 FLN nodes
PXC100-PE96.A
PXC Modular, Ethernet or RS-485
ALN, 96 FLN nodes, TX-I/O module
support
PXC100-E96.A
PXC Modular, BACnet/IP or MS/TP
ALN, 96 FLN nodes, TX-I/O module
support
PXX-485.3
Expansion Module, three RS-485 FLN
connections
PXC Compact Series
PXC36-PE.A
PXC Compact, 36 point, Ethernet/IP or
RS-485 ALN
PXC36-E.A
PXC Compact, 36 point, BACnet/IP or
MS/TP ALN
Caution Notation
CAUTION
Equipment damage or loss of data may
occur if you do not follow a procedure as
specified.
Expected Installation Time
30 minutes
Required Tools and Materials
 Flat-blade screwdriver (1/8-inch blade width).
 Wire strippers.
 Cabling and connectors. See the
Connecting the
Driver to the BACnet Devices section.
CAUTION
Always wear an electro-static discharge
(ESD) wrist strap and discharge
accumulated static before touching field
panel components.