Figure 1: Typical Johnson Controls N2 System Architecture. Siemens Industry, Inc.
Johnson Controls N2 Master Driver on the TC Series Platform Functionality Notes on System Architecture The Johnson Controls N2 Master Driver with Firmware 3.x (Figure 1) supports the following: ● BACnet MS/TP or BACnet/IP ALN on Firmware 3.x. If the driver is on a BACnet MS/TP network, you can use a standard field panel with Firmware Revision 3.1 or later as a router to connect to a BACnet workstation. Do not use an Integration Driver as the router. ● A maximum of 96 devices.
Johnson Controls N2 Master Driver on the TC Series Platform Benefits Benefits Systems integration brings the powerful facility control capabilities of the TALON Automation System together with Johnson Controls system. Integrating the Johnson Controls points allows both systems to operate as a single system providing marked advantages in the following: ● Reduced operating and training costs. ● Increased employee productivity. ● Increased diagnostic capabilities to extend equipment life.
