Data Sheet for Product

Table 1. VMA1200 APOGEE Points, Application Number: 9091, Program ID: 80:00:11:55:02:03:04:01. (continued)
Point Type Description Range/Units
abc
81 LAI
Airflow Output cfm
Lps
88 LAI
–
%
89 LDI
–
Normal/Alarm
94 LAI
This is a measure of the performance of the temperature control. A
large value indicates that the controller is having problems maintaining
the te m perature setpoint.
°F
°C
95 LAI
This is a measure of the performance of the temperature control. A
large value indicates that the controller is having problems maintaining
the te m perature setpoint.
°F
°C
96 LAI
This is a measure of the performance of the fl ow controller. A l
arge
value indicates that the controller is having problems mai
ntaining the
flow setpoint.
cfm
Lps
97 LAI
This is a measure of the performance of the fl ow controller. A large
value indicates that the controller is having problems maintaining the
flow setpoint.
cfm
Lps
98 LAI
This is the number of reversals of the Damper output. It measures the
performance of the damper o utput. A large value may indicate that the
flow controller is having problems controlling.
–
99 LAI
This is the Duty Cycle of the Damper. It m easures o f the performance
of the damper output. A large value may indicate that the flow
controller is having pro blems controlling.
–
100 LAI
–
cfm
Lps
101 LAI
This value represents the amount of outdoor air being
requested. This equals cpOccOArequired/nvonvoEffectFlowSP or
cpUnoccOArequired/nvoEffectFlowSP.
–
102
LAO
–
%
200
LAO Occupancy Temperature Setpoint Occupied Cool °F
°C
201
LAO Occupancy Temperature Setpoint Standby Cool °F
°C
202
LAO Occupancy Temperature Setpoint Unoccupied Cool °F
°C
203 LAI
Occupancy Temperature Setpoint Occupied Heat °F
°C
204
LAO Occupancy Tem perature Setpoint Standby Heat °F
°C
205
LAO Occupancy Temperature Setpo
int Unoccupied Heat
°F
°C
206
LAO Receive Heartbeat C P Input
sec
207
LAO Local Bypa ss Time CP Input
min
208
LAO Manual O verride Time CP Input
min
continued on next page...
Page 4 of 12 Siemens Building Technologies, In c.
Document No. 127-1369