Manualshelf

Installation Instructions

ManualsBrandsSiemens Manuals3rd party integrationAPOGEE Integration to Johnson Controls LONWORKS Devices: VMA1200 Series Controller, Point Map
12
Installation Instructions
Document No. 565-712
November 12, 2013
Johnson Controls N2 Master Driver for PXC Modular and PXC-36
Item Number: 565-712, Rev. FA
Page 1 of 2
These installation instructions cover the connection of
the Johnson Controls N2 Master Driver to the
Johnson devices only.
For hardware installation of the PXC Modular, see
the
PXC Modular Series Installation Instructions
(553-638).
For hardware installation of the PXC-36, see the
PXC Compact 36 Installation Instructions
(553-
504).
Product Description
The Johnson Controls N2 Master Driver enables
communication between the APOGEE® Automation
System and Johnson Controls devices. This is done
by removing the Johnson Controls Field Panel and
replacing it with the Johnson Controls N2 Master
Driver, allowing the driver to control the Johnson
Controls N2 trunk.
Product Numbers
License
LSM-INT-JCIN2M
PXC Modular Series
PXC00-PE96.A
PXC00-E96.A
PXC100-PE96.A
PXC100-E96.A
PXX-485.3
PXC Compact Series
NOTE:
An FLN license is only required if you
need P1 FLN support through the driver.
PXC36-PE.A
PXC Compact, 36 point, Ethernet/IP or
RS-485 ALN.
An additional license is required for P1
FLN (LSM-FLN36.A).
PXC36-E.A
PXC Compact, 36 point, BACnet/IP or
MS/TP ALN.
An additional license is required for P1
FLN (LSM-FLN36.A).
PXC36-PEF.A
PXC Compact, 36 point, Ethernet/IP or
RS-485 ALN. Includes licenses for TX-
I/O module and P1 FLN support.
PXC36-EF.A
PXC Compact, 36 point, BACnet/IP or
MS/TP ALN. Includes licenses for TX-
I/O module and P1 FLN support.
LSM-FLN36.A
License to enable FLN support on
models PXC36-E.A and PXC36-PE.A
Caution Notation
CAUTION
Equipment damage or loss of data may
occur if you do not follow a procedure as
specified.
Expected Installation Time
30 minutes

Summary of content (2 pages)