Data Sheet for Product

Point Map
Rev. 3, February, 2002
Siemens Building Technologies, Inc. Page 1 of 6
Document No. 127-0006
Systems Integration
APOGEE
¥
Open Processor with McQuay Microtech
Driver: C Vintage Water-Cooled Screw Chiller
Table 1. C Vintage Water-Cooled Screw Chiller.
Point Type Description Range/Units
01 LAO Device Address
02 LAO Application Number 5056
03 LAI Chilled Water Temperature – Active Set Point 0 – 80°F
04 LDI Chiller Unit Temperature Type Standard/Low Temperature
05 LAI Compressor Lift Pressure 0 – 65,535 psig
06 LAI Compressor 1 Motor Current 0 – 100% RLA
07 LAI Compressor 2 Motor Current 0 – 100% RLA
08 LAI Compressor 1 Operating Hours 0 – 65280
09 LAI Compressor 2 Operating Hours 0 – 65280
11 LAI Compressor 1 Suction Temperature -40 – 263°F
12 LAI Compressor 2 Suction Temperature -40 – 263°F
15 LAI Compressor Superheat – Discharge Circuit 1 0 – 263°F
16 LAI Compressor Superheat – Discharge Circuit 2 0 – 263°F
17 LAI Compressor Superheat – Suction Circuit 1 0 – 263°F
18 LAI Compressor Superheat – Suction Circuit 2 0 – 263°F
19 LAI Condenser Approach Temperature 0 – 263°F
20 LAI Condenser Differential Pressure – Liquid Line 0 – 6,553 psi
21 LAI Condenser Pump Status See Table 2
22 LAI Condenser Pump No. 1 Operating Hours 0 – 49,999
23 LAI Condenser Pump No. 2 Operating Hours 0 – 49,999
24 LAI Condenser Refrigerant Pressure 0 – 450 psig
25 LAI Condenser Subcooling Temperature
0 – 263°F
26 LAI Condenser Water Flow Rate 0 – 65,535 GPM
27 LDI Condenser Water Flow Status No Flow/Flow
28 LDI Condenser Water Rate Sensor Not Present/Present
continued on next page...

Summary of content (6 pages)