Data Sheet for Product

ManualsBrandsSiemens Manuals3rd party integrationMicrotech 2000 Water Source Heat Pump, Point Map

Point Map

Rev. 3, February, 2002

Siemens Building Technologies, Inc. Page 1 of 10

Document No. 127-0028

Systems Integration

APOGEE

Open Processor with McQuay Microtech

Driver: Series 100 Centrifugal Chiller

Table 1. Series 100 Centrifugal Chiller.

Point Type Description Range/Units

01 LAO Device Address

02 LAO Application Number 5003

03 LAI Time Schedule 1 Beginning Minute 0 – 59 Minutes

04 LAI Time Schedule 1 Ending Minute 0 – 59 Minutes

05 LAI Time Schedule 1 Beginning Hour 1 – 24

06 LAI Time Schedule 1 Ending Hour 1 – 24

07 LAI Time Schedule 1 Beginning Day 1 – 7

(1 = Sunday, 7 = Saturday)

08 LAI Time Schedule 1 Ending Day 1 – 7

(1 = Sunday, 7 = Saturday)

09 LAI Time Schedule 2 Beginning Minute 0 – 59 Minutes

10 LAI Time Schedule 2 Ending Minute 0 – 59 Minutes

11 LAI Time Schedule 2 Beginning Hour 0 – 23

12 LAI Time Schedule 2 Ending Hour 0 – 23

13 LAI Time Schedule 2 Beginning Day 1 – 7

(1 = Sunday, 7 = Saturday)

14 LAI Time Schedule 2 Ending Day 1 – 7

(1 = Sunday, 7 = Saturday)

15 LAI Time Minutes 0 – 59 Minutes

16 LAI Time Hours 0 – 23

17 LAI Time Day 1 – 7

(1 = Sunday, 7 = Saturday)

18 LAI Time Day of Month 1 – 31

19 LAI Time Number of Month 1 – 12

20 LAI Time Year 0 – 99

21 LAI Time Schedule Override in Hours 0 – 51 hours

22 LAI Holiday 1 Day 1 – 31

continued on next page...

Summary of content (10 pages)

PAGE 1
Point Map Rev. 3, February, 2002 Systems Integration APOGEE¥ Open Processor with McQuay Microtech Driver: Series 100 Centrifugal Chiller Table 1. Series 100 Centrifugal Chiller.
PAGE 2
Table 1. Series 100 Centrifugal Chiller.
PAGE 3
Table 2. Series 100 Centrifugal Chiller.
PAGE 4
Table 2. Series 100 Centrifugal Chiller.
PAGE 5
Table 2. Series 100 Centrifugal Chiller. Point Type Description Range/Units 66 LAI Fault 5 See Table 4 67 LAI Fault 6 See Table 4 68 LAI Fault 7 See Table 4 69 LAI Fault 8 See Table 4 70 LAO 20 – 71°F Leaving Evaporator Temperature Set Point. Internal memory has a limited life, so use network chilled water reset point (Point 71) instead (Value of 0 or 255 indicates an to adjust set point. error) 71 LAO Network Chilled Water Reset (% of mA).
PAGE 6
Table 3. Logic Controller Unit Status (Point 3). Value 0 Description Off – load recycle. Leaving chilled water temperature goes below setpoint, so chiller turns off. The chiller satisfied the load. Off – time clock. Chiller is in local and the internal time schedule is unoccupied, so chiller turns off. Off – remote signal. Chiller is in remote and the remote start/stop switch is opened, so chiller turns off. Off – manual switch.
PAGE 7
Table 3. Logic Controller Unit Status (Point 3). Value Siemens Building Technologies, Inc. Document No.
PAGE 8
Table 4. Logic Controller Faults (Points 61 – 69).
PAGE 9
Table 5. Reset Option (Point 81). Value Siemens Building Technologies, Inc. Document No.
PAGE 10
Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as design improvements are introduced. Other product or company names mentioned herein may be the trademarks of their respective owners. © 2002 Siemens Building Technologies, Inc. Siemens Building Technologies, Inc. 1000 Deerfield Parkway Buffalo Grove, IL 60089-4513 U.S.A. Printed in the U.S.A. Document No.