Data Sheet for Product

ManualsBrandsSiemens Manuals3rd party integrationModbus 1000 Driver on the TC Series Platform Technical Specification Sheet

Table Of Contents

Siemens Industry, Inc. Page 1 of 3

Figure 1: System Architecture—Modbus RTU Master, Modbus TCP Client, and Modbus RTU over Ethernet.

Notes on System Architecture

The Modbus 1000 Driver as RTU Master, Modbus TCP Client, and Modbus RTU over

Ethernet (Figure 1) supports the following:

● BACnet MS/TP or BACnet/IP ALN on Firmware 3.

If the driver is on a BACnet MS/TP network, you can use a standard field panel

with Firmware Revision 3.1 or later as a router to connect to a BACnet

workstation. Do not use an Integration Driver as the router.

Summary of content (3 pages)

PAGE 1
Figure 1: System Architecture—Modbus RTU Master, Modbus TCP Client, and Modbus RTU over Ethernet. Notes on System Architecture The Modbus 1000 Driver as RTU Master, Modbus TCP Client, and Modbus RTU over Ethernet (Figure 1) supports the following: ● BACnet MS/TP or BACnet/IP ALN on Firmware 3.x. If the driver is on a BACnet MS/TP network, you can use a standard field panel with Firmware Revision 3.1 or later as a router to connect to a BACnet workstation. Do not use an Integration Driver as the router.
PAGE 2
Modbus 1000 Driver on the TC Series Platform Ordering Information ● ● ● ● ● ● ● ● ● Three physical FLNs (FLN 1 through FLN 3) on TC Modular hardware can be used for connecting and addressing Modbus RTU devices on RS-485 FLNs. Up to two physical FLNs (FLN 1 through FLN 2) on TC-36 hardware, depending on ALN chosen, can be used for connecting and addressing Modbus RTU devices on RS-485 FLNs. Up to 95 virtual FLNs (6 through 100) for mapping devices through an Ethernet TCP/IP network.
PAGE 3
Modbus 1000 Driver on the TC Series Platform Ordering Information Ordering Information NOTE: Since the TX-I/O feature is built into the Driver License, no additional license is required to support TX-I/O with a driver. TC Modular Series TC1000-E96.T with TX- TC Modular, BACnet/IP or MS/TP ALN, 96 FLN nodes, TX-I/O module support. I/O support license PXX-485.3 Expansion Module, three RS-485 FLN connections. (For TC-Modular only.) TC Compact Series TC36-E.T TC Compact, 36 point, BACnet/IP or MS/TP ALN.