Installation Instructions

Installation Instructions
Document No. 565-715
December 9, 2013
FireFinder XLS Driver for PXC Modular and PXC-36
Item Number 565-715(BA)
Page 1 of 4
These installation instructions cover the connection of
the Siemens FireFinder XLS Driver to the FireFinder
XLS fire alarm system only.
 For hardware installation of the PXC Modular, see
the
PXC Modular Series Installation Instructions
(553-638).
 For hardware installation of the PXC-36, see the
PXC Compact 36 Installation Instructions (553-
504).
Product Description
The Siemens FireFinder XLS Driver enables
communication between the APOGEE® Automation
System and the Siemens system.
Product Numbers
License
LSM-INT-SBTXLS
License to enable the Siemens
FireFinder XLS Driver on PXC Modular
or PXC-36 hardware.
PXC Modular Series
PXC00-PE96.A
PXC Modular, Ethernet or RS-485
ALN, 96 FLN nodes
PXC00-E96.A
PXC Modular, BACnet/IP or MS/TP
ALN, 96 FLN nodes
PXC100-PE96.A
PXC Modular, Ethernet or RS-485
ALN, 96 FLN nodes, TX-I/O module
support
PXC100-E96.A
PXC Modular, BACnet/IP or MS/TP
ALN, 96 FLN nodes, TX-I/O module
support
PXX-485.3
Expansion Module, three RS-485 FLN
connections
PXC Compact Series
PXC36-PE.A
PXC Compact, 36 point, Ethernet/IP or
RS-485 ALN
PXC36-E.A
PXC Compact, 36 point, BACnet/IP or
MS/TP ALN
Accessories
538-670
Trunk Interface II, 115V
538-675
Trunk Interface II, 230V
536-004
RS-232 Cable
Caution Notation
CAUTION
Equipment damage or loss of data may
occur if you do not follow a procedure as
specified.
Expected Installation Time
30 minutes
Required Tools and Materials
 Flat-blade screwdriver (1/8-inch blade width).
 Wire strippers.
 Cabling and connectors. See the
Connecting the
FireFinder XLS Driver to the FireFinder XLS
System
[➙ 2] section.