Data Sheet for Product

ManualsBrandsSiemens Manuals3rd party integrationDesigo Fire Safety Modular - Siemens FireFinder XLS Driver Technical Specification Sheet

Technical Specification Sheet

Document No. 127-1682

July 20, 2020

Systems Integration

Desigo Fire Safety Modular (DFSM)

Siemens FireFinder XLS Driver on the PXC Series Platform

Smart Infrastructure

127-1682

2020-20-07

Figure 1: Typical Siemens FireFinder XLS and APOGEE Automation System Configuration (Firmware

Revision 2.x).

Notes on System Architecture

The Siemens FireFinder XLS Driver with Firmware Revision 2.

(Figure 1) supports

the following:

● Monitoring for a maximum of 64 FireFinder XLS panels (PMIs).

● TX-I/O Modules.

● Maximum of 8,000 APOGEE points per driver.

● A maximum of 64 FireFinder XLS panels FireFinder XLS nodes (PMIs) per driver.

Summary of content (4 pages)

PAGE 1
Technical Specification Sheet Document No. 127-1682 July 20, 2020 Systems Integration Desigo Fire Safety Modular (DFSM) Siemens FireFinder XLS Driver on the PXC Series Platform Figure 1: Typical Siemens FireFinder XLS and APOGEE Automation System Configuration (Firmware Revision 2.x). Notes on System Architecture The Siemens FireFinder XLS Driver with Firmware Revision 2.x (Figure 1) supports the following: ● Monitoring for a maximum of 64 FireFinder XLS panels (PMIs). ● TX-I/O Modules.
PAGE 2
Siemens FireFinder XLS Driver on the PXC Series Platform Functionality Figure 2: Typical Siemens FireFinder XLS and APOGEE Automation System Configuration (Firmware Revision 3.x). Notes on System Architecture The Siemens FireFinder XLS Driver with Firmware Revision 3.x supports the following: ● BACnet/IP ALN on Firmware 3.x. Do not use an Integration Driver as the router. ● Monitoring for a maximum of 64 FireFinder XLS panels (PMIs). ● TX-I/O Modules. ● Maximum of 8,000 APOGEE points per driver.
PAGE 3
Siemens FireFinder XLS Driver on the PXC Series Platform Functionality Functionality The Siemens FireFinder XLS Driver can be loaded into PXC Modular or PXC-36 hardware. ● When using a P2 ALN, the Siemens FireFinder XLS Driver communicates with Insight software, other APOGEE field panels and controllers, and the FireFinder XLS system.
PAGE 4
Siemens FireFinder XLS Driver on the PXC Series Platform Ordering Information Other XLS equipment combinations have not been tested for compatibility and may be unsupported. If there are any questions regarding FireFinder XLS fire alarm system, contact your local Siemens representative. Ordering Information LSM-ADAPT PXC36-PE.A PXC Compact, 36 point, Ethernet/IP or RS485 ALN PXC36-E.