Data Sheet for Product

Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as design
improvements are introduced. TALON and TALON View are registered trademarks of Siemens Industry, Inc. Other product or company names
mentioned herein may be the trademarks of their respective owners. © 2009 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
Tel. 1 + 847-215-1000
Your feedback is important to us. If you have
comments about this document, please send them to
[e-mail]
.
Document No. 127-0172T
Printed in the U.S.A.
Page 2 of 2
Notes on System Architecture
The Trane Driver provides communication between
the TALON
®
Automation System and the Trane
system through Trane's BCU panels with an RS-232
connection.
Since the connection to the Trane system is through
their RS-232 port, Trane limits the number of points
through the connection to 350.
Functionality
The Trane Driver can be loaded into TC Modular
hardware. The driver is a microprocessor-based,
multitasking platform designed for multi-system
communication and control. It communicates with
TALON View
® software, other TALON field panels
and controllers, and the Trane System.
Through the TALON View workstation, the Trane
points can be monitored and commanded. The Trane
points integrated into the TALON Automation System
can be accessed by system applications such as
Powers Process Control Language, scheduling,
trending, and alarming.
The Trane Driver will not affect, in any way, the
operating sequence or safeties as factory
programmed into the Trane system.
Keys to Success
The number of points that are available from Trane by
default are minimal. Be sure to specify additional
points that are required at the start of the project to
avoid additional costs from Trane.
Benefits
Systems integration brings the powerful facility control
capabilities of the TALON Automation System
together with the Trane system. Integrating the Trane
points allows both systems to operate as a single
system providing marked advantages in the following:
• Reduced operating and training costs.
• Increased employee productivity.
• Increased diagnostic capabilities to extend
equipment life.
• Improved systems information and control.
• Maximized energy savings.
Products Supported
Trane models supported by the Trane Driver include:
• Chillers
• System Controllers
• AHUs
• Rooftop and Self-contained Units
• Unit Controllers
If there are any questions regarding the Trane system,
contact your local Trane representative.
Ordering Information
Hardware Description Product Number
TC Modular BACnet/IP or
BACnet MS/TP ALN, 96 FLN
nodes
TC1000-E96.T
Expansion module, three
RS-485 FLN connections
PXX-485.3
License Description Product Number
License for Trane
TC Modular Driver
LSM-INT-TRANE.T
NOTE: The TC Modular hardware (Product Number
TC1000-E96.T) is standard hardware and
not unique to Integration Drivers. The TX-I/O
feature is built into the Driver License. No
additional license is required to support TX-
I/O with a driver.
For more information, visit
www.buildingtechnologies.usa.siemens.com