Installation Instructions

Document No. 565-1000T
Installation Instructions
November 3, 2009
FLN
POWER
BLN
DRIVER
S
-
+
S
-
+
RS-485 TRUNK CABLE
(MAX 4000’ / 1219.2 m;
STANDARD 24 AWG LOW CAPACITANCE)
GROUND WIRE TO EARTH
(P/N 538-583)
POWER PACK
RS-232 CABLE
(MAX 50’ / 15.24 m)
TRUNK INTERFACE II
GW0104R2
IF DRIVER IS
LESS THAN
50 CABLE FEET
(15.24 m)
FROM BCU
PANEL,
PLACE TRUNK
INTERFACE II
IN MBC
ENCLOSURE
2
3
7
RS-232 PORT
(25-PIN FEMALE)
RS-232 PORT
(25-PIN MALE)*
TRANE
TRACER SUMMIT
BCU PANEL
TAPE BACK
SHIELD
*STANDARD
RS-232
25-PIN
PC PORT
MALE.
      
47832
Figure 2. Connecting the Trane Driver to the Trane System
with the 25-pin BCU Connector.
The installation is now complete.
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and
models as design improvements are introduced. TALON is a registered trademark of Siemens Industry, Inc. Other product or company names
mentioned herein may be the trademarks of their respective owners. © 2009 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
U.S.A.
Tel. 1 + 847-215-1000
Your feedback is important to us. If you have
comments about this document, please send them to
[e-mail]
Document No. 565-1000T
Printed in the U.S.A.
Page 3 of 3