Data Sheet for Product

Table Of Contents

Point Map

November, 2009

Siemens Industry, Inc. Page 1 of 2

Systems Integration

Trane Standard BACnet Points: Central Control Panel

(CCP)

Type Description Range/Units

LAI Return Air Temperature

°F

LAI Outside Air Temperature

°F

LAI Supply Air Temperature

°F

LAI Economizer Damper Position %

LAI Bypass Damper Position %

LDI Supply Fan Status Off/On

LDI Heat Stage 1 Status Off/On

LDI Heat Stage 2 Status Off/On

LDI CCP Communications Fault/OK

LDI Compressor 1 Status Off/On

LDI Compressor 2 Status Off/On

LDI Filter Status OK/Dirty

LDI Auto Reset Diagnostic Off/On

LAO Economizer Minimum Position Setpoint %

LDO Occupancy State Unoccupied/Occupied

LDO Priority Shutdown Auto/Shutdown

Additional points may be made available. Contact your local Trane representative for more information.

PAGE 1
Point Map November, 2009 Systems Integration Trane Standard BACnet Points: Central Control Panel (CCP) Type Description Range/Units LAI Return Air Temperature °F LAI Outside Air Temperature °F LAI Supply Air Temperature °F LAI Economizer Damper Position % LAI Bypass Damper Position % LDI Supply Fan Status Off/On LDI Heat Stage 1 Status Off/On LDI Heat Stage 2 Status Off/On LDI CCP Communications Fault/OK LDI Compressor 1 Status Off/On LDI Compressor 2 Status Off/On LDI
PAGE 2
Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners. © 2009 Siemens Industry, Inc. Siemens Industry, Inc. Building Technologies Division 1000 Deerfield Parkway Buffalo Grove, IL 60089-4513 U.S.A. Printed in the U.S.A. Document No.