Data Sheet for Product

Table Of Contents

Point Map

November, 2009

Siemens Industry, Inc. Page 1 of 2

Systems Integration

Trane Standard BACnet Points: Constant Volume

Intellipak

Type Description Range/Units

LAI Space Temperature

°F

LAI Supply Air Temperature

°F

LAI Economizer Damper Position %

LAI Cooling Output %

LDI Supply Fan Status Off/On

LDI Heat/Cool Mode Heat/Cool

LDI Filter Status OK/Dirty

LDI Manual Reset Diagnostic Exists No/Yes

LDI Intellipak Communications Fault/OK

LAO Space Temperature Setpoint

°F

LDO Occupancy State Unoccupied/Occupied

LDO Priority Shutdown Auto/Shutdown

Additional points may be made available. Contact your local Trane representative for more information.

PAGE 1
Point Map November, 2009 Systems Integration Trane Standard BACnet Points: Constant Volume Intellipak Type Description Range/Units LAI Space Temperature °F LAI Supply Air Temperature °F LAI Economizer Damper Position % LAI Cooling Output % LDI Supply Fan Status Off/On LDI Heat/Cool Mode Heat/Cool LDI Filter Status OK/Dirty LDI Manual Reset Diagnostic Exists No/Yes LDI Intellipak Communications Fault/OK LAO Space Temperature Setpoint °F LDO Occupancy State Unoccupied/Occu
PAGE 2
Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners. © 2009 Siemens Industry, Inc. Siemens Industry, Inc. Building Technologies Division 1000 Deerfield Parkway Buffalo Grove, IL 60089-4513 U.S.A. Printed in the U.S.A. Document No.