Data Sheet for Product

ManualsBrandsSiemens Manuals3rd party integrationRT Sunline Rooftop Unit, Point Map

Point Map

February 7, 2007

Systems Integration

YORK ISN Enhanced Driver: A1 Air-Cooled Screw

Chillers (Master)

Table 1. A1 Master APOGEE Points, Applic ation Number: 5851.

Point Type Descripti

Range/Uni

abc

LAO

Device Address

–

2 LAI Device Application

–

LAO

Logon Password

–

LAO Open Password

–

LDI

Yorktalk Translator Communication Status Normal/Fail

8LDI

Device Communication Status Normal/Fail

9LAI

Leaving Chilled Water Temperature Set Point °F

°C

10 LAI

Remote Current Set Point (Load Limit) %

11 LAI

Lead Unit

Number Set Point

°F

°C

12 LAI

Lag Start Set Point %

13 LDI

Start/Stop Status Off/On

14 LDI

Load The Chiller Yes/No

15 LDI

Unload The Chiller Yes/No

16 LAI

Leaving Chille d Water Temperature °F

°C

17 LAI

Enterin

g Ch illed Water Temperature

°F

°C

18 LAI

Mixed Chilled Water Temperature °F

°C

19 LAI

Compressor 1 Suction Temperature °F

°C

20 LAI

Compressor 1 Discharge Temperature °F

°C

21 LAI

Outside Air Temperature °F

°C

22 LAI

Compressor 1 Oil Temperature °F

°C

continued on next page...

iemens Building Technologies, Inc.

age 1 of 4

ocument No. 127-1572

Summary of content (4 pages)

PAGE 1
Point Map February 7, 2007 Systems Integration YORK ISN Enhanced Driver: A1 Air-Cooled Screw Chillers (Master) Table 1. A1 Master APOGEE Points, Application Number: 5851.
PAGE 2
Table 1. A1 Master APOGEE Points, Application Number: 5851.
PAGE 3
Table 1. A1 Master APOGEE Points, Application Number: 5851.
PAGE 4
Table 1. A1 Master APOGEE Points, Application Number: 5851. (continued) Range/Unitsa Point Type Description 75 LAO Remote Current Limit Set Point % 76 LAO Lead Unit Number Set Point – 77 LAO Lag Start Set Point °F °C b c a Values noted for LDIs and LDOs are in the following format: OFF text/ON text. b This column indicates the value/range or engineering units or both if known. c The default English value is not italicized. An italicized entry indicates an SI value.