Printer Accessories User Manual

Multi Address Appearance on OpenStage 00.00.2007 I 22
¾ Ring on/off: Determines whether the line rings on an incoming call.
Value range: "On", "Off"
Default: "On"
¾ Ring delay: Time interval in seconds after which the line starts ringing on an incoming call.
Default: 0
¾ Selection order: Priority assigned to the line for the selection of an outgoing line.
Default: 0
¾ Address: Address/phone number which has a corresponding entry on the SIP server/registrar.
¾ Realm: Domain wherein user id and password are valid.
¾ User Identifier: User name for authentication with the SIP server.
¾ Password: Password for authentication with the SIP server.
¾ Shared type: Determines whether the line is a shared line (shared by multiple endpoints) or a
private line (only available for this endpoint).
Value range: "shared", "private", "unknown".
Default: "shared"
¾ Hot/Warm line type: Determines whether the line is a hot line or a warm line.
Value range: „hot line“, „warm line“
¾ Hot/Warm line destination: Number to be dialled when the phone is in hotline or warmline
mode.
¾ Allow in Overview: Determines whether the line appears in the phone’s line overview.
Value range: "Yes", "No"
Default: "Yes"
¾ Hot warm action (V2): Determines if the line is a regular line, a hot line, or a warm line.
Value range: "No action", "hot line", "warm line"
¾ Hot warm destination (V2): The destination to be dialled from the hot/warm line when the
user goes off-hook.
Remark: A new line key can only be added by use of the WBM or, preferably, using the WPI [4]. Once
a line key exists, it can also be configured by the local menu.