Data Sheet for Product

6/10
CA1N4454en Modulating control valves with magnetic actuator, PN16 CA1N4454en
Building Technologies 2017-11-30
Maintenance notes
The valves and actuators are maintenance-free.
The low friction and robust design make regular servicing unnecessary and ensure a
long service life.
The valve stem is sealed from external influences by a maintenance-free gland.
Should the valve electronics prove faulty, the electronics module should be replaced
with replacement part ZM250. Mounting instructions are enclosed (Ref. 35731).
Always disconnect the power before fitting or removing the terminal housing.
The terminal housing is calibrated and matched to the actuator, and should be
replaced only by qualified personnel.
Under operating conditions within the limits defined by the application data, the
actuator will become hot, but this does not represent a burn risk. Always main-
tain the minimum clearance specified, refer to "Dimensions", page 10.
Disposal
The device is considered electrical and electronic equipment for disposal
in terms of the applicable European Directive and may not be disposed
of as domestic garbage.
∂ Dispose of the device through channels provided for this pur-
pose.
∂ Comply with all local and currently applicable laws and regula-
tions.
Warranty
Application-specific technical data must be observed.
If specified limits are not observed, Siemens will not assume any responsibility.
Repair
Warning
Warning