Data Sheet for Product

ManualsBrandsSiemens ManualsExtinguishing - ManifoldsMANI50-2-80-x

A6V11335626_en--_a Smart Infrastructure

2020-08-19 Building Products

Sinorix™

MANI50-2-80-x

IG-01, IG-55, IG-100, IG-541

DN50 2

row manifold for 80

l extinguishant cylinders

● For connection of 4 to 10 extinguishant cylinders

● Compatible with 80 l cylinders

● PN: 360 bar

● 1 manifold for 2 rows of cylinders

● For use in Sinorix™ CDT, SDT and H2O Gas automatic gas extinguishing

systems

Product codes:

MANI50-2-80-4 - S54476-B756-A4

MANI50-2-80-6 - S54476-B756-A6

MANI50-2-80-8 - S54476-B756-A8

MANI50-2-80-10 - S54476-B756-A10

Summary of content (5 pages)

PAGE 1
Sinorix™ MANI50-2-80-x IG-01, IG-55, IG-100, IG-541 DN50 2-row manifold for 80 l extinguishant cylinders ● For connection of 4 to 10 extinguishant cylinders ● Compatible with 80 l cylinders ● PN: 360 bar ● 1 manifold for 2 rows of cylinders ● For use in Sinorix™ CDT, SDT and H2O Gas automatic gas extinguishing systems Product codes: MANI50-2-80-4 - S54476-B756-A4 MANI50-2-80-6 - S54476-B756-A6 MANI50-2-80-8 - S54476-B756-A8 MANI50-2-80-10 - S54476-B756-A10 A6V11335626_en--_a 2020-08-19 Smart
PAGE 2
Use These products must only be used with Sinorix™ fixed automatic extinguishing systems. Functions The manifold connects the cylinders of the battery. It collects the extinguishant and conveys it to the discharge network. Each cylinder is connected to the manifold via a discharge hose, a check valve, and in CDT systems, a pressure regulator.
PAGE 3
Product documentation Type Title Document ref. Mounting Sinorix™ NXN CDT-IG-x-300 A6V101065426 Sinorix™ CDT IG-100-300 NXN FR A6V12019059 Sinorix™ NXN SDT-IG-x-200, IG-x-300 A6V101065532 Mounting Notes Safety This product may only be installed by Siemens-authorized specialized installers, with experience in the design, installation and maintenance of automatic extinguishing systems.
PAGE 4
Maintenance Storage ● Store in its original packaging, protected from shocks. ● Store in a clean and dry location, protected from bad weather. Transport ● During transport, use caps to protect the threads. Inspection ● Check the good condition of the product. ● Check that each fitting has been properly tightened using the appropriate wrench. Retighten if necessary. ● Check the integrity of the surface treatment. The frequency of the product inspection is subject to applicable local regulations.
PAGE 5
Certifications and compliances 2014/68/EU (PED) Compliant Dimensions Dimensions in mm Reference A B C D E MANI50-2-80-4 557 ±2 82 92.5 ±1 90 ±1 192 ±1 MANI50-2-80-6 839 ±2 82 92.5 ±1 90 ±1 192 ±1 MANI50-2-80-8 1 121 ±3 82 92.5 ±1 90 ±1 192 ±1 MANI50-2-80-10 1 403 ±3 82 92.5 ±1 90 ±1 192 ±1 Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug Tel. +41 58 724 2424 www.siemens.