User Manual

ManualsBrandsSiemens ManualsExtinguishing - Pressure Gauges and Pressure SwitchesMANOF230-S315, MANOF230-S400

A6V11583050_en--_a Smart Infrastructure

2020

Building Products

Sinorix™

MANOF230-S315, MANOF230-S400

IG-01, IG-55, IG-100, IG-541

Pressure gauge for F230 cylinder valves

● Visual check of the cylinder pressure

● Removable pressure gauge when the cylinder is pressurized

Product codes:

MANOF230-S315 - S54476-F541-A1

MANOF230-S400 - S54476-F541-A3

Summary of content (7 pages)

PAGE 1
Sinorix™ MANOF230-S315, MANOF230-S400 IG-01, IG-55, IG-100, IG-541 Pressure gauge for F230 cylinder valves ● Visual check of the cylinder pressure ● Removable pressure gauge when the cylinder is pressurized Product codes: MANOF230-S315 - S54476-F541-A1 MANOF230-S400 - S54476-F541-A3 A6V11583050_en--_a 2020-09-14 Smart Infrastructure Building Products
PAGE 2
Use This product must only be used with SinorixTM fixed automatic extinguishing systems. Functions The pressure gauge allows the pressure in the cylinder on which it is mounted to be checked visually. The pressure gauge is designed to be mounted on vibration-free units. The pressure gauge is designed to be fitted and removed safely when the cylinder is pressurized.
PAGE 3
Notes Safety This product may only be installed by Siemens-authorized specialized installers, with experience in the design, installation and maintenance of automatic extinguishing systems.
PAGE 4
Removing the pressure gauge The contact pressure gauge is designed to be fitted and removed safely when the cylinder is pressurized. WARNING A slight "plop" noise can be heard when removing the pressure gauge attached to a pressurized cylinder Remove the manometer carefully. Refer to the mounting and maintenance instructions to obtain the detailed procedure.
PAGE 5
Technical data MANOF230-S315 Technical information Nominal dimension 50 mm Nominal pressure 200 bar Measurement range 0 to 315 bar Accuracy class 1.
PAGE 6
Certifications and compliances VdS G309005 RoHS Compliant 305/2011/EU (CPR) EN 12094-10 0786-CPR-30095 The declared performance and conformity can be seen in the Declaration of Performance (DoP) and/or the EU Declaration of Conformity (DoC), which are obtainable via the Customer Support Center: Tel. +49 89 9221-8000 or https://siemens.com/bt/download.
PAGE 7
Issued by Siemens Switzerland Ltd Smart Infrastructure Global Headquarters Theilerstrasse 1a CH-6300 Zug Tel. +41 58 724 2424 www.siemens.com/buildingtechnologies Siemens Schweiz AG Building Products Document ID A6V11583050_en--_a Edition 2020-09-14 © Siemens Switzerland Ltd, 2018 Technical specifications and availability subject to change without notice.