Catalog PLT 112 · 2002 This catalog is out of date, see note on page 3 teleperm m AS 488/TM automation systems
This catalog is out of date, see note on page 3 Related catalogs TELEPERM M AS 235, AS 235 H and AS 235 K Automation Systems PLT 111 Order No.: E86060-K3811-A100-A3-7600 TELEPERM M Operation and Monitoring with WinCC/TM PLT 123 Order No.: E86060-K3823-A100-A1-7600 TELEPERM M CS 275 Bus System PLT 130 Order No.: E86060-K3813-A100-A1-7600 SIMATIC PCS 7 SIMATIC PCS 7 Process Control System ST PCS 7 Order No.
AS 488/TM automation systems System architecture Catalog PLT 112 · 2002 The products in this catalog are also included in the CD-ROM Catalog CA 01 Order No.: E86060-D4001-A100-B7-7600 Please contact your local Siemens office or representative.
This catalog is out of date, see note on page 3 Introduction 1/2 1/2 1/2 1/3 1/3 1/3 1/4 1/5 1/6 1/6 TELEPERM M Process Control System Overview Automation systems Operator systems Engineering System bus Migration strategy AS 488/TM Overview Highlights - Classification in the TELEPERM M system environment Area of application Functions - Highlights Siemens PLT 112 · 2002 6/1
This catalog is out of date, see note on page 3 Introduction TELEPERM M Process Control System Introduction ■ Overview The TELEPERM M process control system provides all functions required for process automation. It is highly suitable for the complete automation of continuous or discontinuous (batch) processes. The TELEPERM M systems are divided into functional units optimized for different task encountered with process automation: • Automation systems • Operator systems • Bus systems.
This catalog is out of date, see note on page 3 Introduction TELEPERM M Process Control System Engineering Migration strategy The PROGRAF AS+/NT configuring software which can be installed on personal computers with the Windows NT or Windows 2000 operating system is predestined for the engineering of TELEPERM M automation systems. An engineering PC with PROGRAF AS+/NT can be connected to one of the two TELEPERM M system buses using a bus-specific interface module.
This catalog is out of date, see note on page 3 Introduction AS 488/TM ■ Overview The AS 488/TM automation system based on the SIMATIC M7-400 hardware platform combines the advantages of a modern hardware generation with the AS 235 functionality of the TELEPERM M process control system proven in numerous applications. It is suitable for automation of continuous processes or also of recipe-based batch processes.
This catalog is out of date, see note on page 3 Introduction AS 488/TM AS 488/TM systems for new plants exclusively with distributed I/Os on the PROFIBUS-DP can also be installed in SIMATIC PCS 7 cabinets. The SIMATIC S7/M7 installation guidelines also apply to this version (see Catalog ST PCS7.A, add-ons for the SIMATIC PCS 7 process control system).
This catalog is out of date, see note on page 3 Introduction AS 488/TM ■ Area of application ■ Functions The main applications of the AS 488/TM are: Highlights • Replacement of existing AS 220, AS 230/230 K and AS 235/235 K automation systems With an AS 220 / AS 230 / AS 235, the subrack with the central processing units in the TELEPERM M cabinet is replaced by an AS 488 S with compatible functions. Existing extension units with installed TELEPERM M I/Os can be used further.
This catalog is out of date, see note on page 3 System architecture 2/2 System properties 2/4 2/5 2/5 2/5 2/6 2/9 2/9 System software Data blocks Blocks for analog and digital processing Blocks for binary processing Blocks for processing with standardized operation and monitoring Blocks for signal exchange via the CS 275 or PROFIBUS-TM system bus Blocks for distributed process I/Os on the PROFIBUS-DP fieldbus Blocks for PLC/PLC coupling with PROFIBUS-AG/AG Driver blocks for I/O modules of the TELEPERM
This catalog is out of date, see note on page 3 System architecture System properties ■ Overview System architecture ■ Functions The AS 488/TM automation system consists of standard hardware components from the SIMATIC M7 systems, supplementary components for applications in TELEPERM M, and a memory card with system software whose functions are compatible with the AS 235 automation system.
This catalog is out of date, see note on page 3 System architecture System properties ■ Technical Specifications Quantity breakdown The AS 488/TM automation systems have the following quantity breakdowns: AS 488/TM CPU 486-3 Control loops *) 45 to 120 CPU 488-3 90 to approx. 216 Additional analog value monitoring 45 to 180 90 to approx. 324 Sequential controls *) 8 to 20 16 to approx. 36 Logic controls *) 150 to 370 300 to approx.
This catalog is out of date, see note on page 3 System architecture System software ■ Overview User function blocks A separate memory card with system software is required for each automation system. The system software of the AS 488/TM is completely present on this memory card, and only executes there. The software is reloaded each time the system is switched on or reset. The memory card is divided into a system memory and a user memory.
This catalog is out of date, see note on page 3 System architecture System software ■ Configuration Blocks for binary processing Listing of TELEPERM M standard function blocks Data blocks Type Name Function VU AND A = E1 AND E2 AND E3 VO OR A = E1 OR E2 OR E3 Type Name Function VN Negation A = NOT E GA Data block for global analog values Storage of 256 analog values with error 10-9; storage of process image, historical values etc.
This catalog is out of date, see note on page 3 System architecture System software Blocks for processing with standardized operation and monitoring Blocks for signal exchange via the CS 275 or PROFIBUS-TM system bus Type Name Function Type Name Function R Controller PID controller, e.g. for disturbance variable feedforward; tracking of setpoint and manipulated variable; limit generation AKS Analog coupling and transmitter block Transmission of max.
This catalog is out of date, see note on page 3 System architecture System software Blocks for distributed process I/Os on the PROFIBUS-DP fieldbus Type Name Function DPAE Analog input DP Acquisition of analog signals via the distributed process I/O modules DPAA Analog output DP Output of analog signals via the distributed process I/O modules DPBE Binary input DP Acquisition of binary signals via the distributed process I/O modules DPBA Binary output DP Output of binary signals via the distri
This catalog is out of date, see note on page 3 System architecture System software Driver blocks for I/O modules of the TELEPERM M system via the TPM 478 communications module Type AE AR AA BEI BRA BAU Name Function For modules with Order No.
This catalog is out of date, see note on page 3 System architecture System software Blocks for I/O modules with standardized display Type Name Function For modules with Order No.
This catalog is out of date, see note on page 3 System architecture Commissioning ■ Overview A commissioning terminal is required for commissioning and system configuring of the AS 488/TM or the CS-L2 bridge. A personal computer/programming device with the commissioning terminal software ASBEDIEN belonging to the system software can be used as the commissioning terminal. The commissioning terminal software is delivered in two versions for MS-DOS and Windows NT operating systems.
This catalog is out of date, see note on page 3 System architecture Engineering with PROGRAF AS+ ■ Overview PROGRAF AS+/NT is a powerful PC-based engineering tool for the TELEPERM M AS 230/230 K and AS 235/235 K/235 H as well as AS 388/TM and AS 488/TM automation systems (including the AS 488 S and AS 488 K versions with a varying design). It is equipped with a convenient graphical user interface based on Microsoft Windows NT 4.0/2000/XP.
This catalog is out of date, see note on page 3 System architecture Engineering with PROGRAF AS+ Configuration of customer-specific and branch-specific libraries Central online commissioning PROGRAF AS+/NT can be used to generate customer-specific or branch-specific libraries with elements which are used repeatedly when configuring. This is also possible for several workstations with PC network support.
This catalog is out of date, see note on page 3 System architecture Engineering with PROGRAF AS+ ■ Ordering Data Accessories Order No. PROGRAF AS+/NT comprising: • 1 software CD with program package in German and English • Software protection (dongle) PC components (ISA) for connection to TELEPERM M system bus 6DL5 255-1CX Order No. CP 5412 (A2) communications processor for connection to the PROFIBUS-TM bus system comprising: • CP 5412 (A2) • Firmware on 3.
This catalog is out of date, see note on page 3 System architecture 2/14 Siemens PLT 112 · 2002
This catalog is out of date, see note on page 3 AS 488 S Cabinet system 3/2 3/2 3/2 3/2 3/4 AS 488 S cabinet system Overview Ordering data Scope of delivery of AS 488 S systems Accessories Siemens PLT 112 · 2002 6/1
This catalog is out of date, see note on page 3 Cabinet system AS 488 S AS 488 S cabinet system Cabinet system ■ Ordering Data Order No.
This catalog is out of date, see note on page 3 Cabinet system AS 488 S AS 488 S cabinet system Power supply • AS 488 S systems, versions 1, 2, 3 and 4, for operation with TELEPERM M I/O modules - PS 405 load power supply, 20 A, TELEPERM M packaging system Input: DC 24 V, output: DC 24 V/DC 5 V, 20 A, width: 3 standard slots - 2 backup batteries type AA; 3.6 V; 1.
This catalog is out of date, see note on page 3 Cabinet system AS 488 S AS 488 S cabinet system Accessories Accessories Order No. Order No.
This catalog is out of date, see note on page 3 AS 488 K Compact system 4/2 4/2 4/2 4/2 4/3 AS 488 K compact system Overview Ordering data Scope of delivery of AS 488 K systems Accessories Siemens PLT 112 · 2002 6/1
This catalog is out of date, see note on page 3 Compact system AS 488 K AS 488 K compact system ■ Overview Compact system ■ Ordering Data Order No. Compact basic system Versions 1AA to 4AA in TELEPERM M compact design and for operation with TELEPERM M I/O modules AS 488 K compact system • 5 I/O slots • System software The AS 488 K compact system is a design version of the AS 488/TM automation system which is compatible with the previous AS 235 K system.
This catalog is out of date, see note on page 3 Compact system AS 488 K AS 488 K compact system TELEPERM M I/Os connection • Connection of TELEPERM M AS I/Os to 488 K, comprising: - TPM 478-1 interface module (1 x for TELEPERM M I/Os and for connection to CS 275) - TBX 478 interface module, for connection of TELEPERM M I/O buses - Set of ribbon cables for I/O buses with 3 or 2 slots Connection to CS 275 system bus • TPM 478-1 interface module (1 x for TELEPERM M I/Os and for connection to CS 275; see und
This catalog is out of date, see note on page 3 Compact system AS 488 K AS 488 K compact system Accessories Order No.
This catalog is out of date, see note on page 3 AS 488 in SIMATIC design 5/2 5/2 5/2 Introduction Overview Technical Specifications 5/4 5/5 5/6 5/7 5/8 5/8 5/9 5/10 5/10 Central processing unit Power supply modules Connection of distributed I/Os Connection to TELEPERM M I/Os Connection to CS 275 Connection to PROFIBUS-TM Packaging system System software Documentation Siemens PLT 112 · 2002 6/1
This catalog is out of date, see note on page 3 AS 488 in SIMATIC design Introduction AS 488/TM AS 488 in SIMATIC design ■ Technical Specifications System configuration Basic system SIMATIC M7-400 with CPU 486-3 (75 MHz Pentium), rack and AC or PC power supply module Extensions IF 961-DIO, IF 962-COM, IF 964-DP (max. 4), EXM 478 (max.
This catalog is out of date, see note on page 3 AS 488 in SIMATIC design Introduction AS 488/TM Coupling to other systems with DP interface • SIMATIC S7 CPU 315-2 DP • SIMATIC S7 CPU 316-2 DP • SIMATIC S7 CPU 318-2 DP • SIMATIC S7 CP 340 • DP/DP coupler • S5-95 Quantity breakdown When using floating-point numbers, see supplementary package "DP extensions for AS x88/TM" When using floating-point numbers, see supplementary package "DP extensions for AS x88/TM" When using floating-point numbers, see sup
This catalog is out of date, see note on page 3 AS 488 in SIMATIC design Central processing unit I & C monitoring The IF 961-DIO interface module for digital input/output is used for I & C monitoring functions. It is inserted into the EXM 478-3 module in the CPU 486-3/488-3 of the AS 488 automation system. The IF 961-DIO module can be used to record I & C signals e.g. for: • Door contact • Overtemperature • Monitoring of optical link module OLM or to trigger a cabinet lamp or horn. Line monitoring, e.g.
This catalog is out of date, see note on page 3 AS 488 in SIMATIC design Power supply modules Backup battery A backup battery is additionally required for the AS 488/TM automation system. The PS 405 and PS 407 load power supplies are fitted with a battery compartment. If the power supply fails, the time and date in the CPU are buffered. ■ Ordering Data Order No.
This catalog is out of date, see note on page 3 AS 488 in SIMATIC design Connection of distributed I/Os ■ Ordering Data Order No. EXM 478 expansion module to accommodate 3 interface modules 6ES7 478-2AC00-0AC0 Required 1 x for each of the max. 2 DP lines with electrical version of PROFIBUS-DP: IF 964-DP interface module 6ES7 964-2AA01-0AB0 Required 1 x for each of the max.
This catalog is out of date, see note on page 3 AS 488 in SIMATIC design Connection to TELEPERM M I/Os ■ Ordering Data Order No. TPM 478 interface module for connection to CS 275 and for TELEPERM M I/Os 6ES7 478-2DA01-0AC0 TBX 478 interface module for connection to TELEPERM M I/Os (I/O bus A/B) 6ES7 478-2DX00-0AA0 ■ Overview Together with the TPM 478 interface module, the TBX 478 interface module connects the I/O modules of the TELEPERM M process control system to the AS 488/TM system.
This catalog is out of date, see note on page 3 AS 488 in SIMATIC design Connection to CS 275 Connection to PROFIBUS-TM Connection to CS 275 Connection to PROFIBUS-TM ■ Overview ■ Overview The AS 488/TM and the CS-L2 bridge can be connected to the CS 275 bus system via the TPM 478 interface module.
This catalog is out of date, see note on page 3 AS 488 in SIMATIC design Packaging system Migration rack An AS 488/TM system can be installed in an existing TELEPERM M cabinet by using an MIG I or MIG II migration rack. The MIG I migration rack (simple version) is designed using 19" technology and equipped with the SIMATIC S7-400 backplane bus to accommodate the AS 488/TM system modules (power supply, CPU and interface modules).
This catalog is out of date, see note on page 3 AS 488 in SIMATIC design System software, documentation System software Documentation ■ Overview ■ Overview For operation as well as loading and archiving of the system and user functions, the CPU provides an interface for a memory card in addition to the integral main memory (RAM). The non-volatile memory on the memory card of the AS 488/TM automation systems is divided into system and user memories.
This catalog is out of date, see note on page 3 SIMATIC PCS 7 cabinet design 6/2 6/2 Introduction Overview 6/3 6/4 6/5 Basic cabinet ET 200M I/O unit System unit Siemens PLT 112 · 2002 6/1
This catalog is out of date, see note on page 3 SIMATIC PCS 7 cabinet design Introduction Cabinet packaging system SIMATIC PCS 7 cabinet design Modular design System-specific modules • AS 488/TM system unit • ET 200M I/O unit (ET 200U/ET 200B on request) System-neutral modules • Basic cabinet, consisting of framework, door, outer walls, internal mechanical parts and power supply assembly with: - Compartment for documents - Trim - AC 230 V socket - AC 230 V or DC 24 V cabinet illumination - I & C monitori
This catalog is out of date, see note on page 3 SIMATIC PCS 7 cabinet design Basic cabinet Electrical design Each delivered cabinet contains: • Power supply assembly AC 230 V or DC 24 V • Cable clamps and screen bars for I/O and bus cables • Prewiring of power supply cables for central and I/O units • Wiring of PROFIBUS-DP fieldbus • Connector board for cabinet earth Options for the electrical design • AC 230 V socket (installed in power supply assembly) • I & C monitoring (2 versions): - I & C monitoring
This catalog is out of date, see note on page 3 SIMATIC PCS 7 cabinet design ET 200M I/O unit Hot swapping When ordering an ET 200M I/O station, it is additionally possible to order the hot swapping function. In an I & C system, it may be necessary to replace modules during operation for reasons of increased availability. The I/O subsystem for hot swapping is available for this as a version of the ET 200M.
This catalog is out of date, see note on page 3 SIMATIC PCS 7 cabinet design AS 488/TM system unit • DC 24 V or AC 120/230 V power supply: depending on the input voltage, the AS 488/TM can be equipped either with a PS 407 power supply module (AC 120/230 V supply) or a PS 405 power supply module (DC 24 V supply), each rated at 10 A. These supply the AS 488/TM modules with the DC 5 V and DC 24 V operating voltages via the backplane bus.
This catalog is out of date, see note on page 3 SIMATIC PCS 7 cabinet design 6/6 Siemens PLT 112 · 2002
This catalog is out of date, see note on page 3 Migration of existing systems 7/2 Introduction 7/3 7/3 7/5 7/7 7/8 7/9 Migration packages AS 488 S migration package AS 488 K migration package MIG I migration rack MIG II migration rack MIG K migration rack 7/10 7/11 7/12 Retrofitting services Check list prior to retrofitting Configuring lists Migratable TELEPERM M modules in AS 488/TM Siemens PLT 112 · 2002 6/1
This catalog is out of date, see note on page 3 Migration of existing systems Introduction Migration of existing systems ■ Overview Migration of existing systems ■ Configuration Two different design versions of the AS 488/TM migration packages are available for migrating existing TELEPERM M AS 220 S, AS 230, AS 230 K, AS 235 and AS 235 K automation systems: AS 488 S and AS 488 K.
This catalog is out of date, see note on page 3 Migration of existing systems Migration packages AS 488 S migration package Additive supplementary components and services Previous experience has shown that migration solutions are usually extremely specific, and deviate from the standard scope of the AS 488 S migration packages. Components or system expansions, e.g.
This catalog is out of date, see note on page 3 Migration of existing systems Migration packages AS 488 S migration package ■ Configuration General marginal conditions/limitations The conversion of an AS 220 S/AS 230/AS 235 into an AS 488 S is carried out 1:1, i.e. the respective basic unit in the existing TELEPERM M cabinet (without I/O modules for AS 220 S and AS 235, or without extension unit EE1 for AS 230) is replaced by a migration rack with the AS 488 S with compatible functions.
This catalog is out of date, see note on page 3 Migration of existing systems Migration packages AS 488 K migration package • Configuration and activation of the AG/AG coupling (additional hardware required) • Configuration and activation of the MODBUS coupling (additional hardware required) • Basic installation of PROFIBUS-DP coupling (additional hardware required) • Reconfiguration and adaptation of an existing PROFIBUS-DP coupling (additional hardware required) The necessity for packages for supplementa
This catalog is out of date, see note on page 3 Migration of existing systems Migration packages AS 488 K migration package ■ Ordering Data The migration of existing automation systems using AS 488 K migration packages is a complex process comprising a quotation and ordering phase with detailed clarification based on a checklist, the data conversion phase, delivery and commissioning on site, and the return of licensed components.
This catalog is out of date, see note on page 3 Migration of existing systems Migration packages MIG I migration rack The migration racks are the core components of the AS 488 S and AS 488 K migration packages. They integrate the AS 488/TM automation systems as replacements for existing basic units/systems in an existing TELEPERM M system environment.
This catalog is out of date, see note on page 3 Migration of existing systems Migration packages MIG II migration rack ■ Design Configuration possibilities for I/Os System-specific configuring of the I/Os means that the MIG II migration rack can be used extremely flexibly either for the migration of AS 230 systems or for AS 220 S and AS 235 systems with up to 5 I/O modules each in the basic unit.
This catalog is out of date, see note on page 3 Migration of existing systems Migration packages MIG K migration rack ■ Technical Specifications Design ES 902 subrack (19-inch system), screwed connection of subrack from front Backplane 9 slots for AS 488/TM central modules, 5 slots preassembled for TELEPERM M I/O modules Number of I/O buses 2 I/O buses, division of 5 I/O slots in ratio 3:2 possible using ribbon cable Slot addresses • Slot addressing; frame addresses selectable using plug-in jumpers
This catalog is out of date, see note on page 3 Migration of existing systems Retrofitting services ■ Overview • Travel costs will be charged in addition The following contract conditions apply to all services (standard or supplementary services) provided in the context of a migration: • The services are based on the conditions of the "General installation conditions" • The application software will be converted 1:1, i.e.
This catalog is out of date, see note on page 3 Migration of existing systems Check list prior to retrofitting ■ Overview AS configuration for cabinet/compact system for migration with AS 488 S Details required for a quotation for migration: Basic cabinet/basic system: Plant configuration (structure diaphragm) • Accessibility of cabinet/system • OS systems: - Types, quantity • Packaging system, special built-on and built-in accessories • Engineering systems: - Types, quantity, connection • Access
This catalog is out of date, see note on page 3 Migration of existing systems Configuring lists Migratable TELEPERM M modules in AS 488/TM Migratable TELEPERM M modules in AS 488/TM Designation Order No.
This catalog is out of date, see note on page 3 Migration of existing systems Configuring lists Migratable TELEPERM M modules in AS 488/TM Explanations for the column „Remarks“ Designation Order No. of module Release Remarks Binary calculation modules 1) 2) 3) 5) 6) 7) Binary calculation module 6DS1 717-8AA *) ≥8 SW:08 16) 24) Binary/analog calculation module (max.
This catalog is out of date, see note on page 3 Migration of existing systems 7/14 Siemens PLT 112 · 2002
This catalog is out of date, see note on page 3 Process I/Os 8/2 Introduction 8/3 8/4 8/6 Connecting TELEPERM M I/Os Connecting SIMATIC I/Os DP extensions for AS 488/TM 8/7 8/9 8/11 8/12 ET 200M packaging system ET 200M modules ET 200M Ex I/O modules Function and communication modules 8/13 8/15 8/15 8/15 8/16 ET 200S ET 200X ET 200U ET 200B SIWAREX M 8/17 Connecting PROFIBUS-PA to AS 488/TM Siemens PLT 112 · 2002 6/1
This catalog is out of date, see note on page 3 Process I/Os Introduction Process I/Os ■ Overview A wide range of SIMATIC ET 200B, ET 200M, ET 200S, ET 200X and ET 200U 1) distributed I/O systems with a comprehensive selection of I/O modules is available for the AS 488/TM for the acquisition and output of process signals via sensors and actuators. The I/O modules of the ET 200M distributed I/O system specially tailored for process engineering are particularly recommendable.
This catalog is out of date, see note on page 3 Process I/Os Connecting TELEPERM M I/Os TBX 478 interface module The TBX 478 interface module together with the TPM 478 interface module links the I/O modules of the TELEPERM M system to the AS 488/TM system.
This catalog is out of date, see note on page 3 Process I/Os Connecting SIMATIC I/Os Communication via the PROFIBUS-DP fieldbus The PROFIBUS-DP fieldbus is standardized according to EN 50 170, Part 3. It permits communication between the AS 488/TM automation systems and ET 200 distributed I/O systems, CPUs/CPs with DP interface, DP-oriented operation and monitoring devices, and PROFIBUS field devices conforming to the standard.
This catalog is out of date, see note on page 3 Process I/Os Connecting SIMATIC I/Os COM PROFIBUS COM PROFIBUS is a tool used for fieldbus configuring and for parameterization of the bus stations prior to commissioning. COM PROFIBUS can be installed on the commissioning terminal or on a PC/programming device with Microsoft Windows 95/98/Me/NT/2000.
This catalog is out of date, see note on page 3 Process I/Os DP extensions for AS 488/TM ■ Mode of operation Driver blocks ■ Overview Starting with the AS 488/TM system software M01.00, the ET 200M, ET 200U and ET 200B distributed I/O systems are explicitly released for the AS 488/TM as remote I/Os on the PROFIBUS-DP. Use of these systems on the AS 488/TM was supported by the DPAE/DPAA and DPBE/DPBE driver blocks right from the beginning. S5 and S7 formats could be used for the raw analog values.
This catalog is out of date, see note on page 3 Process I/Os ET 200M packaging system ■ Overview The ET 200M modular I/O system with degree of protection IP 20 can be extended by signal modules and function modules of the SIMATIC S7-300 automation system. The wide range of modules means that it is suitable for individual or complex automation tasks. The ET 200M is a passive station (slave) on the PROFIBUS-DP fieldbus.
This catalog is out of date, see note on page 3 Process I/Os ET 200M packaging system ■ Design ■ Ordering Data Order No. Simple packaging system with bus connectors The simple packaging system with SIMATIC S7-300 bus connectors makes the ET 200M flexible and easy to service: • Module installation Simply hook the modules into the DIN rail, swing into place, and screw tight. • Integral backplane bus The backplane bus is integrated into the modules.
This catalog is out of date, see note on page 3 Process I/Os ET 200M modules ■ Overview In conjunction with the AS 488/TM automation systems, the following I/O modules of the SIMATIC S7-300 automation system can be used in ET 200M I/O systems: ■ Ordering Data Order No.
This catalog is out of date, see note on page 3 Process I/Os ET 200M modules SM 323 digital input/output modules SM 332 analog output modules • 8 inputs, 8 outputs 6ES7 323-1BH01-0AA0 • 8 inputs, 8 outputs, extended temperature range 6ES7 323-1BH81-0AA0 • 16 inputs, 16 outputs 6ES7 323-1BL00-0AA0 SM 331 analog input modules • 2 outputs, 12 bit 6ES7 332-5HB01-0AB0 • 2 outputs, 12 bit, extended temperature range 6ES7 332-5HB81-0AB0 • 4 outputs, 12 bit 6ES7 332-5HD01-0AB0 • 4 outputs, 15 bit 6
This catalog is out of date, see note on page 3 Process I/Os Ex I/O modules ■ Overview ■ Ordering Data The following Ex I/O modules can be used in ET 200M I/O systems operated together with AS 488/TM automation systems: Ex digital input/output modules [EEx ib] Ex digital input module 321-7RD 4 inputs, floating, NAMUR Ex digital output module 322-5SD 4 outputs, floating, DC 24 V, 10 mA Ex digital output module 322-5RD 4 outputs, floating, DC 15 V, 20 mA Intrinsically-safe equipment which can be con
This catalog is out of date, see note on page 3 Process I/Os Function and communications modules ■ Overview ■ Ordering Data Special function and communications modules can be operated in the ET 200M I/O systems connected to the AS 488/TM automation system via PROFIBUS-DP.
This catalog is out of date, see note on page 3 Process I/Os ET 200S ET 200S ■ Design The following components are available for the ET 200S distributed I/O system: • Interface module to connect the ET 200S to the PROFIBUS-DP (IM 151 or IM 151 FO), or alternatively • IM 151/CPU or IM 151/CPU FO with additional integrated CPU 314 for preprocessing of process data • Terminal modules for DIN rail mounting including terminals (keyed connection system permits increased vibration resistance of 5 g); rail system
This catalog is out of date, see note on page 3 Process I/Os ET 200S ET 200S ■ Ordering Data Analog input modules Order No.
This catalog is out of date, see note on page 3 Process I/Os ET 200S ET 200X, ET 200U and ET 200B Design Standard modules • Digital input/output module with 4, 8 or 16 channels • Relay output module with 4 or 8 channels • Analog input/output module with 2 or 4 channels Ex modules • Digital input/output module • Analog input/output module Function modules • IP 262 closed-loop control modules for continuous controllers or pulse controllers ET 200X The RIP and KRIP drivers for the IP 262 closed-loop control
This catalog is out of date, see note on page 3 Process I/Os SIWAREX M SIWAREX M ■ Configuration SIWA driver block The AS 388/TM and AS 488/TM automation systems additionally require the SIWA driver block for connection of SIWAREX M. SIWA is a standard AS function block with the system type number 138, and can be downloaded into the automation system via a commissioning terminal.
This catalog is out of date, see note on page 3 Process I/Os PROFIBUS-PA Connecting PROFIBUS-PA to AS 488/TM Properties and application features of the PROFIBUS-PA • Networking of transmitters, valves, actuators etc.
This catalog is out of date, see note on page 3 Process I/Os PROFIBUS-PA Connecting PROFIBUS-PA to AS 488/TM ■ Design ■ Mode of operation Connection of PROFIBUS-PA using DP/PA coupler The PROFIBUS-DP is connected to the AS 488/TM via an IF 964-DP interface module which can be plugged into an EXM 478 extension module. DP/PA couplers are available in two versions: an Ex version with max. 100 mA output current and a non-Ex version with 400 mA output current.
This catalog is out of date, see note on page 3 Process I/Os PROFIBUS-PA Connecting PROFIBUS-PA to AS 488/TM ■ Technical Specifications Technical data ■ Ordering Data DP/PA link (IM 157) DP/PA coupler only Max. number of DP lines 2 2 Max. number of slaves per DP line 122 122 Number of bytes for inputs per DP slave 122 122 Number of bytes for outputs 122 per DP slave 122 Max.
This catalog is out of date, see note on page 3 Process I/Os 8/20 Siemens PLT 112 · 2002
This catalog is out of date, see note on page 3 Bus communication 9/2 PROFIBUS-TM 9/5 CS 275 9/7 9/9 9/10 9/11 9/11 9/12 9/12 9/12 CS-L2 bridge Cebtral processing unit Power supply modules Connection to PROFIBUS-TM Connection to CS 275 Packaging system System software Documentation Siemens PLT 112 · 2002 6/1
This catalog is out of date, see note on page 3 Bus communication PROFIBUS-TM PROFIBUS-TM Bus communication Transmission systems PROFIBUS offers a comprehensive range of network components for electrical and optical transmission systems. ■ Overview The AS 488/TM and AS 388/TM automation systems are connected to one another, to OS 525 or PCS7/TM-OS operator systems and to PCs/programming devices with the PROGRAF AS+/NT configuration software via the PROFIBUS-TM system bus.
This catalog is out of date, see note on page 3 Bus communication PROFIBUS-TM PROFIBUS-TM Bus connector The bus connector can be used to directly connect the stations on the PROFIBUS together in loop-through mode. The connector is easy to mount, and has an integral terminating resistor.
This catalog is out of date, see note on page 3 Bus communication PROFIBUS-TM PROFIBUS-TM Optical bus terminal (OBT) for PROFIBUS The OBT (optical bus terminal) is used to connect a PROFIBUS station without an integral optical interface to an optical line with PROFIBUS stations with integral interface and OBT. The PROFIBUS station is connected to an RS 485 interface of the OBT via a cable terminated at both ends, e.g. connecting cable 830-1T.
This catalog is out of date, see note on page 3 Bus communication CS 275 CS 275 ■ Overview In the following, you will be provided with information relevant to connection of the AS 488/TM to the CS 275 bus system. Please refer to Catalog PLT 130 for detailed information on the TELEPERM M CS 275 bus system, in particular on design and mode of operation.
This catalog is out of date, see note on page 3 Bus communication CS 275 CS 275 Order No. Remote bus cable Standard remote bus cable 1) Specify length in plain text (max. 4 km) V45466-D21-B35 Length ..... m In-house remote bus cable 1) Specify length in plain text (max. 2 km) Note: When mixed with standard remote bus cable, the total length of both cables must not exceed 4 km. V45466-D17-B135 Length .....
This catalog is out of date, see note on page 3 Bus communication CS-L2 bridge CS-L2 bridge The hardware of the CS-L2 bridge is largely identical to that of the AS 488/TM system (UR2 rack, power supply modules, CPU, interface modules and components for connection to CS 275 and PROFIBUS-TM). Connection to the CS 275 local bus is via the TPM 478 communications module, connection to the PROFIBUS-TM via the EXM 478 extension module with IF 964 interface module.
This catalog is out of date, see note on page 3 Bus communication CS-L2 bridge CS-L2 bridge ■ Configuration ■ Technical Specifications Station addresses CS-L2 bridge The address range defines the stations which are accessible on the PROFIBUS-TM from the CS 275 bus system via the CS-L2 bridge. From the viewpoint of PROFIBUS-TM, all stations whose addresses are not within the address range must be stations on the CS 275 bus.
This catalog is out of date, see note on page 3 Bus communication CS-L2 bridge Central processing unit The inputs and outputs are electrically isolated. The module electronics (ASIC) is protected against overvoltages by appropriate circuitry measures. The digital inputs comprise 8 channels organized in groups of 4 x 2 channels. The current consumption is 8.5 mA with an input level of DC 24 V. An input delay of 500 ms or 3 ms can be parameterized for all input channels together.
This catalog is out of date, see note on page 3 Bus communication CS-L2 bridge Power supply modules The power supply module is inserted in the subrack on the left. It is designed in a casing, and is cooled by natural convection.
This catalog is out of date, see note on page 3 Bus communication CS-L2 bridge Connection to PROFIBUS-TM Connection to CS 275 Connection to PROFIBUS-TM ■ Overview ■ Overview The CS-L2 bridge is connected to PROFIBUS-TM using an IF 964 interface module in an EXM 478 extension module. ■ Ordering Data Order No. EXM 478 extension module to accommodate 3 interface modules 6ES7 478-2AC00-0AC0 The CS-L2 bridge can be connected to the CS 275 bus system via the TPM 478 interface module.
This catalog is out of date, see note on page 3 Bus communication CS-L2 bridge Packaging system Packaging system System software ■ Overview ■ Overview UR2 rack The UR2 rack is the basic mechanical frame of the AS 488/TM automation system. It accommodates the system modules (CPU, load power supply, EXM 478, TPM 478 and TBX 478), provides the operating voltages for the modules, and connects the individual modules via the backplane bus.
This catalog is out of date, see note on page 3 Data couplings with other systems 10/2 Introduction 10/3 AG-AG coupling software 10/5 Serial coupling Siemens PLT 112 · 2002 6/1
This catalog is out of date, see note on page 3 Data couplings with other systems Introduction Data couplings Data couplings with other systems Interface module Type of coupling Interface Procedure Electrical Coupling partner isolation IF 964-DP Data bus connection PROFIBUS FDL Yes SIMATIC S5 programmable controllers with CP 4531 or CP 451 communications processor, S5-95U IF 964-DP Data bus connection PROFIBUS FDL Yes SIMATIC S7-400 programmable controllers with CP 443-5 communications pr
This catalog is out of date, see note on page 3 Data couplings with other systems System couplings AG-AG coupling software ■ Overview AG/AG coupling with SIMATIC S5/S7 central controllers The devices of the SIMATIC S7-300 and S7-400 automation systems and those of the SIMATIC S5-95F, S5-95U, S5-115U, S5135U and S5-155U automation systems can be coupled to AS 388/TM and AS 488/TM automation systems via an additional PROFIBUS-AG/AG parallel to the PROFIBUS-TM or CS 275 TELEPERM M system bus.
This catalog is out of date, see note on page 3 Data couplings with other systems System couplings AG-AG coupling software ■ Technical Specifications Released coupling partners for AS 388/TM and AS 488/TM ■ Ordering Data SIMATIC S7-300, S7-400 SIMATIC S5-155U, S5-135U, S5-115U, S5-95U, S5-95F (in each case as PROFIBUS master) Bus system PROFIBUS-AG/AG • Version Glass fiber-optic cables or electric (Cu) Bus interface module for AS 388/TM and AS 488/TM IF 964-DP interface module • Mechanical interfa
This catalog is out of date, see note on page 3 Data couplings with other systems Direct couplings Serial coupling ■ Design The interface module for SIMATIC S5/S7 central controllers, 6DS1 333-8AB, is a double-height compact assembly. The front panel width is 30.48 mm (2 standard slots). The module has 2 backplane connectors for the I/O bus interface, and two serial interfaces for connecting a SIMATIC S5/S7 central controller.
This catalog is out of date, see note on page 3 Data couplings with other systems Direct couplings Serial coupling ■ Technical Specifications ■ Ordering Data Power supply Order No. • L+ DC 24 V, 260 mA • PM DC 24 V, 40 mA Number of channels/interfaces 2 Interface to the SIMATIC S5 central controller 20-mA current loop, transmitter and receiver either active, nonfloating or passive, isolated Max.
This catalog is out of date, see note on page 3 Appendix 11/2 Software licenses 11/3 Information and order option in the Internet or on CD-ROM 11/4 Internet 11/4 Training 11/5 Order no.
This catalog is out of date, see note on page 3 Appendix Software licenses Software Appendix ■ Software types Software requiring a license is categorized into types. The following software types have been defined: • Engineering software • Runtime software Engineering software This includes all software products for creating (engineering) user software, e.g. for configuring, programming, parameterizing, testing, commissioning or servicing.
This catalog is out of date, see note on page 3 Appendix Information and order option in the Internet and on CD-ROM ■ A&D at WWW ■ Product selection with interactive catalogs ■ Easy Shopping at the Siemens Mall A detailed knowledge of the range of products and services available is essential when planning and configuring automation systems. It goes without saying that this information must always be fully up-to-date.
This catalog is out of date, see note on page 3 Appendix Internet, Training ■ Internet Informations about the TELEPERM M process control system and the migration to SIMATIC PCS 7 are now presented in our new Internet site www.siemens.
This catalog is out of date, see note on page 3 Appendix Order No. index ■ Order No. index 6DL2 140-.............................................4/2 6DL2 141-.............................................3/2 6DL5 255-...........................................2/13 6DS1 202-8AB....................................7/13 6DS1 310-8AA....................................7/13 6DS1 310-8AB....................................7/13 6DS1 318-8AB....................................7/13 6DS1 321-8AA......................
