Specifications

MC35i AT Command Set

1. Introduction

obil

MC35i_ATC_V01.03 Page 13 of 444 5/7/04

Confidential / Released

1. Introduction

1.1 Scope of the document

This document presents the AT Command Set for the Siemens Cellular Engines

MC35i Version 01.03

MC35i Terminal Version 01.03.

Before using the Cellular Engine or upgrading to a new firmware version please read the latest product informa-

tion provided in the Release Notes [1].

More information is available at the Siemens Website: http://www.siemens.com/wm

If features differ between MC35i and MC35i Terminal this is noted in the section that refers to the AT command.

At present the following features are concerned:

Table 1.1: Product specific use of AT commands

AT command Module version Terminal version

AT+ILRR Maximum bit rate: 230400 bps Maximum bit rate: 115200 bps

AT+IPR Maximum bit rate: 230400 bps Maximum bit rate: 115200 bps

AT+CALA Alarm mode and reminder message fully

applicable

Does not support Alarm mode. Please

ignore any information relating to the

subject.

The reminder message can be used as

described.

AT^SAIC All parameters usable as described. Additional recommendations for using

audio modes 2, 3 and 6 with MC35i Ter-

minal.

AT^SSYNC SYNC pin may be assigned different

functions:

<mode> 0 or 1.

SYNC pin supports only <mode>=1 .

(LED status)

AT^SBC All functions fully applicable Command not applicable