Specifications

MC35i AT Command Set
15.6 AT^SPBD
s
m obil e
MC35i_ATC_V01.03 Page 361 of 444 5/7/04
Confidential / Released
15.6 AT^SPBD Purge phonebook memory storage
This command is used to purge the selected phonebook <storage> manually, i.e. all entries previously stored
in the selected phonebook storage will be deleted.
CAUTION! The operation cannot be stopped nor reversed!
Automatic purging of phonebooks is performed when the SIM card is removed and replaced by a different SIM
card. This affects the ME-based part of the "LD" storage, and storages "MC" and "RC". Storage "ME" is not
affected.
For unsuccessful automatic call attempts, a "blacklist" functionality according to GSM02.07, Annex A is imple-
mented. Since the module cannot determine whether user interaction is taking place, the blacklist must be
deleted by the application, when applicable. This can be done using command AT^SPBD with parameter "BL".
This command can be used only after the phonebook data from the SIM have been read successfully for the first
time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the read process is in progress, an attempt to use any of the phonebook com-
mands will result in "+CME Error: 14" (SIM busy).
Syntax
Command Description
The test command returns a list of supported <storage>s.
The write command is used to select the phonebook
<storage> to be purged.
Test Command
AT^SPBD=?
Response(s)
^SPBD: list of supported <storage>s
OK
+CME ERROR
Write Command
AT^SPBD=<storage>
Response(s)
OK
+CME ERROR
PIN ASC0 MUX1 MUX2 MUX3
% % % % %
Reference(s)
GSM02.07, SIEMENS