Specifications

MC35i AT Command Set
19.2 List of Star-Hash (*#) Codes
s
m obil e
MC35i_ATC_V01.03 Page 423 of 444 5/7/04
Confidential / Released
Table 19.3: Possible Star-Hash Command Responses
For exact specification of format and parameters for Star-Hash commands refer to GSM 02.04, Table 3.2 [15]
and GSM 02.30, Annex C [16].
Table 19.4: Star-Hash Codes for Supplementary Services
BS Basic service equivalent to parameter
class:
Voice
FAX
SMS
SMS+FAX
Data circuit asynchron
Data circuit synchron
dedicated PAD access
dedicated Packet access
Data circuit asynchron+PAD
Data circuit synchron+Packet
Data circuit asynchron+syn-
chron+Packet+PAD
All Services
11
13
16
12
25
24
27
26
21
22
20
--
T Time in seconds In contrast to AT+CCFC, parameter T has
no default value. If T is not specified, an
operator defined default or the last known
value may be used, depending on the net-
work operator.
PW Password --
C Character of TE character set (e.g. aster-
ics, hash or digit in case of USSD, or digits
in case of held calls or multiparty calls)
--
Parameter Meaning
<m> Mode: 0 = not active, 1 = active
<n> Unsolicited result code: 0 = presentation disabled, 1 = presentation enabled
<status> Status: 0 = not active, 1 = active
<class> Represents BS = basic service, refer to AT+CCFC, AT+CLCK
<fac> Facility lock, refer AT+CLCK
<reason> Call forwarding reason
Star-Hash Code Abbreviations in Table 19.1 Functionality
* act Activate (except for CLIR, see list above)
** reg Register and activate
*# int Check status (interrogate)
# deact Deactivate (except for CLIR, see list
above)
## eras Unregister and deactivate
Abbreviation Meaning Value