75V Bildschirm / Moniteur / Monitor / Skärm / Beeldscherm BETRIEBSANLEITUNG OPERATING MANUAL
Sie haben ... ... technische Fragen oder Probleme? Wenden Sie sich bitte an unseren Help Desk (siehe Garantiekarte). Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw. finden Sie im Internet: http://www.fujitsu-siemens.com Is there ... ... any technical problem or other question you need clarified? Please contact our Help Desk (see Guarantee Card). The latest information on our products, tips, updates, etc., can be found on the Internet under: http://www.fujitsu-siemens.
Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.
Deutsch English 175V Farbbildschirm Color monitor Moniteur couleur Monitor de color Monitor a colori Färgskärm Kleurenbeeldscherm Français Español Italiano Svenska Nederlands TCO'99 Betriebsanleitung Operating Manual Ausgabe Mai 2000 May 2000 edition
VESA, DDC und DPMS sind eingetragene Warenzeichen der Video Electronics Standards Association. Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung. Liefermöglichkeiten und technische Änderungen vorbehalten.
Contents Introduction........................................................................................................................................1 Notational conventions ..............................................................................................................1 Important notes .................................................................................................................................2 Safety ................................................................
Introduction Your new 175V monitor supplies you with a high-quality color image with high resolution and ergonomic refresh rates. It possesses a whole range of useful features and functions, e. g.: • • 17" (40 cm) high-resolution CRT (0.
Color monitor 175V Important notes ! In this chapter you will find information regarding safety which is essential to take note of with your monitor. Safety This device complies with the relevant safety regulations for data processing equipment, including electronic office machines for use in an office environment. If you have any questions, contact your sales outlet or our Help Desk.
Color monitor 175V • Keep this Operating Manual together with your device. If you pass on the device to third parties, you should include this manual. Cleaning note175V • • • • • • Always pull out the power plug before you clean the monitor. Do not clean any interior parts yourself, leave this job to a service technician. Do not use any cleaning agents that contain abrasives or may corrode plastic. Ensure that no liquid will run into the system.
Color monitor 175V FCC Class B Compliance Statement If there is an FCC statement on the device, then: The following statement applies to the products covered in this manual, unless otherwise specified herein. The statement for other products will appear in the accompanying documentation.
Color monitor 175V Power cable for devices distributed in the US and Canada In the United States and Canada the cord set must also be UL-listed and CSA-labelled. The voltage rating should be min. 250 volts a.c. Please consult the following table for the selection criteria for power cables used in the United States and Canada.
Color monitor 175V We herewith declare that it will be possible to repair any device marked with the eco-label for at least 5 years after production of that device has discontinued. If you have any questions on disposal, please contact your local office, our Help Desk, or: Fujitsu Siemens Computers GmbH Recyclingcenter D-33106 Paderborn Tel.: ++ 49 5251 - 818 010/ Fax: ++ 49 5251 - 818 015 Checking the contents of the consignment Ê Ê Ê Unpack all the individual parts.
Color monitor 175V preferable viewing sector 0° approx. 90° 65° 30° 60° 30° permissible 65° viewing sector permissible viewing sector Position the monitor for optimum viewing. The viewing distance to the monitor should be approximately 50 cm. approx. 90° and more Keep ventilated areas clear. Remember to maintain correct posture. Attaching the monitor base Your monitor is shipped with a base which allows you to rotate and tilt the monitor to the best position.
Color monitor 175V 13° 45° 45° 4° Tilting and turning area Connecting the monitor See your PC's operating manual for details of the ports on the system unit. ! Please note the "Safety" information provided in the chapter "Important notes" in the Operating Manual of the PC. Do not cover the ventilation openings of the monitor. If you are assembling monitors beside each other, there must be a minimum distance of 30 cm between monitors of the same constructional type, to avoid image distortion.
Color monitor 175V The data cable (2) is permanently attached to the monitor. It has a 15-pin D-SUB connector for the screen controller of the system unit. See your PC's operating manual for details of the ports on the system unit. Ê Connect the 15-pin connector of the data cable to the (active) monitor port on the system unit and secure the plug-in connection by tightening the safety screws.
Color monitor 175V Switching the monitor on Ê Press the ON/OFF switch (3). The power indicator (2) lights up green when the system unit is turned on. i If your PC has a power management function (energy-saving mode), you should read the "Notes on power management" of the monitor in this chapter. Switching the monitor off Ê Press the ON/OFF switch (3). The power indicator (2) is dark.
Color monitor 175V Changing the monitor settings With the buttons on the control panel, call up and use the integrated OSD (On-Screen Display) menu. I EXIT MENU 1 2 3 1 = EXIT button 2 = ! button (brightness) 4 3 = " button (contrast) 4 = MENU button Settings with the OSD menu To set the OSD menu, perform the following steps: Ê Press the MENU button to activate the OSD menu. The main menu appears on the screen with icons for the setting functions. H: 68.
Color monitor 175V Adjusting the brightness and contrast i You can also set the brightness and contrast using the ! key (brightness) and the " key (contrast). You will increase the life of your screen if you adjust the contrast and brightness to medium.
Color monitor 175V Picture rotation (ROTATION): Rotating the picture in a clockwise or counterclockwise direction Setting color temperature and colors The "warmth" of the screen colors is set using the color temperature. The screen has two preset color temperatures, 9300 K and 6500 K, and one user-defined color temperature (USER COLOR). You can select any of both color temperatures as the starting point for setting your color percentage values.
Color monitor 175V Activating the factory settings Factory settings are provided for brightness and contrast, picture size and position and picture geometry in the predefined operating modes. Activating the factory settings (RECALL) ALL MODES = eset all settings THIS MODE = Reset current setting QUIT = Retain user settings Masking out the OSD menu Masking out the OSD menu. All changes are stored automatically.
Color monitor 175V Technical data Dimensions and weight CRT: 43.20 cm (17“) Visible diagonals: 40.60 cm Dot pitch: 0.28 mm Maximal resolution: 1280 x 1024 pixels Preset display area: 300 mm x 230 mm Maximal display area: 324 mm x 246 mm Dimensions (W x H x D): 410 mm x 410 mm x 430 mm Weight: 16 kg Accessories: Power cable (1.5 m) Storable display modes: 29 (9 of which are preset) Electrical data Video: analog, positive, 0.
Color monitor 175V VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the PC. If your PC is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from your monitor and select the appropriate settings.
Color monitor 175V Pin assignment D-SUB (15-pin) 5 1 6 10 15 11 Pin Meaning Pin Meaning 1 Red video input 9 not connected 2 Green video input 10 Logic ground 3 Blue video input 11 Ground 4 Ground 12 DDC data (SDA) 5 DDC Return 13 H. sync 6 Red video ground 14 V. sync 7 Green video ground 15 DDC Clock 8 Blue video ground (SCL) Error handling Should an error occur, first check the following points.
Color monitor 175V The screen is blank (power indicator does not light) Ê Ê Ê Check whether the monitor is switched on. Check whether the power cable on the monitor is connected correctly. Check whether the power outlet is live. The screen is blank (power indicator lights) Ê Ê Check whether the system unit is switched on. Ê Ê Ê Check whether the monitor connection of the system unit used is active.