User Manual

Functional capabilities
18
Building Technologies 053_DMS_MM8000_MP4.15_System_Description_A6V10062417_a_en
Fire Safety & Security Products 06.2008
Alarm printouts
Treatment steps and graphic maps can be printed out automatically or upon re-
quest in order to provide the operator for a hard copy of the operating instructions.
Report forms
If this option is a step of an assisted treatment procedure, a form appears on the
right when you click the text in the checklist. Complete the required fields and click
the check box when finished. The report automatically compiles and no further ac-
tion is required.
Event protocol
The event protocol, displayed upon request during guided assisted treatment, con-
tains the complete event history, including the event generation, the subsequent
changes of status, the operator’s commands and the treatment step executions.
Sometimes it may also be necessary to add a note to the action history of an
event. A single action may be annotated in the protocol list, or the event itself may
be annotated. The ability to perform this action is dependent upon the specific
rights granted to the current operator.
2.1.4.2 Assisted treatment modes
Assisted treatment offers two ways of providing assistance to the operator: free
and guided.
With free treatment, a series of treatment tools are made available for the operator
to use, as they deem appropriate to the situation. Actions performed during free
treatment are not recorded in the history browser.
With guided treatment, a treatment procedure checklist is provided and some or all
steps in this procedure must be completed before the event can be closed. All ac-
tions performed during guided treatment are recorded for review in the history
browser.
Guided mode
The treatment checklist, a step-by-step list of instructions that you should follow for
a specific event, is the heart of guided treatment. As you select a step on the left by
clicking the text, information related to that step displays on the right. For example,
if you have a step requiring you to check where the event occurred, when you se-
lect that step in the list, a map displays in the window to the right. Once you have
performed the step, you check it off in the checkbox, and go on to the next step.