Specifications
AT Command Set for L55 Platform 2003-11-21
Copyright Siemens AG 2003 All Rights Reserved Page 104 of 131
2.4.2.27 AT^SPST
AT^SPST Play Signal Tone
Test command
AT^SPST =?
Response
^SPST: (list of supported <n>s)
OK
Write command
AT^SPST =<n>,<m>
Response
OK/ERROR/+CME ERROR
Parameter
<n>
Type of Signal Tone (st = self terminating)
0 Carkit PTT (st)
1 Carkit PTT long (st)
2 Carkit Crash (st)
3 Carkit Error (st)
4 Carkit Call Setup (st)
<m> Mode
0 Stop tone (not necessary for self terminating tones)
1 Play tone
2.4.2.28 AT^SPWD
AT^SPWD Change password to a lock (including user-defined locks)
Test command
AT^SPWD=?
Response
^SPWD: list of supported (<fac>, <pwdlength>)s
OK/ERROR/+CME ERROR
Parameter
<fac>
P2
PIN2
PS Phone locked to SIM (device code)
SC SIM card (PIN)
AO BAOC (bar all outgoing calls)
OI BOIC (bar outgoing international calls)
OX BOIC-exHC (bar outgoing international calls except to
home country)
AI BAIC (bar all incoming calls)
IR BIC-Roam (bar incoming calls when roaming outside
the home country)
AB All barring services
AG All outgoing barring services
AC All incoming barring services
PN Network personalization (GSM 02.22, [6])
PC Corporate personalization (GSM 02.22, [6]
PU Network subset personalization (GSM 02.22, [6]
PP Service provider personalization (GSM 02.22, [6])
PF Phone locked to very first inserted SIM
<pwdlength> Length of password
Write command
AT^SPWD = <fac>,<oldpwd>, <newpwd>
Parameter
<fac>
See Test command
<oldpwd> Old password
<newpwd> New password
Response
OK/ERROR/+CME ERROR