Specifications

AT Command Set for L55 Platform 2003-11-21
Copyright  Siemens AG 2003 All Rights Reserved Page 121 of 131
Meaning:
All voice memos stored are to be deleted.
AT^SVMC=5,2
Meaning:
The voice memo stored with the index 2 is to be deleted.
2.8.4.3 Read command
The Read command indicates whether a playback or recording is running (type), the remaining time
(recording time or playback time) and the name (if available) of the current Voice Memo.
Sample input and resulting output:
AT^SVMC?
^SVMC: 0
Meaning:
Currently no action is performed for a voice memo, the value of <type> is “Idle”.
AT^SVMC?
^SVMC: 1,”00:10:00”
Meaning:
A voice memo is being recorded, with 10 minutes’ record time remaining
AT^SVMC?
^SVMC: 2,”00:00:30”
Meaning:
A voice memo is being played back, with 30 seconds remaining
2.8.4.4 Execute command
The Execute command controls the pausing of playback and recording. Each time this command is
executed there is a change between playback/record and pause.
Pause a recording or playback depending on the current running action. The following table shows the
possible response for the execution command:
State of VM-
AL
Command Response Meaning Next State
Recording ^SVMC: 0,”00:00:30” OK 30s are recorded ‘Pause Recording’
Pause
Recording
OK recording continued ‘Recording’
Playing ^SVMC: 1,”00:00:40” OK 40s are played ‘Pause Playing’
Pause Playing OK playback continued ‘Playing’
Other states ERROR
(+CME ERROR:
operation temporarily not