Specifications

AT Command Set for L55 Platform 2003-11-21
Copyright  Siemens AG 2003 All Rights Reserved Page 24 of 131
Cont.
Response
If <mode>=2 and command is successful
+CLCK: <status>[,<class1>[<CR><LF>
+CLCK: <status>, class2....]]
OK/ERROR/+CME ERROR
Parameter
<status>
0 Off
1 On
Note:
If no device code (“PS”) has previously been entered, at+clck=ps,2 will
return an error.
It is possible to set a new device code or to delete it using the
AT+CPWD command.