Specifications

AT Command Set for L55 Platform 2003-11-21
Copyright  Siemens AG 2003 All Rights Reserved Page 26 of 131
2.3.3.8 AT+CLIR
AT+CLIR Select Incognito Mode (Call Line Identification Restriction)
Test command
AT+CLIR=?
Response
+CLIR: (list of supported <n>s)
OK/ERROR/+CME ERROR
Parameter
<n>
0 Presentation indicator is used according to network
1 CLIR invocation (incognito)
2 CLIR suppression (not incognito)
Read command
AT+CLIR?
Response
+CLIR: <n>, <m>
OK/ERROR/+CME ERROR
Parameter
<n>
See Test command
<m> 0 CLIR not provisioned (not incognito)
1 CLIR provisioned in permanent mode (incognito)
2 Unknown
3 CLIR temporarily mode presentation restricted (next call
incognito)
4 CLIR temporarily mode presentation allowed (next call not
incognito)
Write command
AT+CLIR=[<n>]
Parameter
<n>
See Read command
Response
OK/ERROR/+CME ERROR