Specifications

AT Command Set for L55 Platform 2003-11-21
Copyright  Siemens AG 2003 All Rights Reserved Page 27 of 131
2.3.3.9 AT+CNUM
AT+CNUM Read own numbers
Test command
AT+ CNUM=?
Response
+CNUM:
OK/ERROR/+CME ERROR
Write command
AT+CNUM
Parameter
+CNUM: [<alpha1>],<number1>,<type1>[...]]
Response
OK/ERROR/+CME ERROR
Parameter
<alphax>
optional alphanumeric string associated with <numberx>;
used character set should be the one selected with
command Select TE Character Set AT+CSCS
<numberx> string type phone number of format specified by <typex>
<typex> type of address octet in integer format (refer GSM 04.08 [8]
subclause 10.5.4.7)
2.3.3.10 AT+COLP
AT+COLP Connected Line Identification Presentation
Test command
AT+COLP=?
Response
+COLP: (list of supported <n>s)
OK/ERROR/+CME ERROR
Parameter
<n>
0 Disable
1 Enable
Read command
AT+COLP?
Response
+COLP: <n>, <m>
OK/ERROR/+CME ERROR
Parameter
<n>
See Test command
<m> 0 COLP not provisioned (no presentation)
1 COLP provisioned
2 Unknown
Write command
AT+COLP=[<n>]
Parameter
<n>
See Test command
Response
OK/ERROR/+CME ERROR
Unexpected message
+COLP: <num>,<type>