Specifications
AT Command Set for L55 Platform 2003-11-21
Copyright Siemens AG 2003 All Rights Reserved Page 28 of 131
2.3.3.11 AT+COPN
AT+COPN Read operator names
Test command
AT+COPN=?
Response
OK
Execute command
AT+COPN
Response
+COPN:numeric <oper>,long alphanumeric <oper><CR><LF>
+COPN:.....
OK/ERROR/+CME ERROR
Parameter
<oper>
Network operator in numeric and alphanumeric notation see
AT^SPLM
2.3.3.12 AT+COPS
AT+COPS Commands concerning selection of network operator
Test command
AT+COPS=?
Response
+COPS: [list of supported (<stat>,long alphanumeric <oper>,,numeric
<oper>)s][,,( list of supported <mode>s),( list of supported
<format>s)]
OK/ERROR/+CME ERROR
Parameter
<stat>
0
Unknown
1 Useful network operator
2 Used network operator
3 Prohibited network operator
<oper> Operator in the format according to <mode>
<mode> 0 Automatic mode
1 Manual selection of network operator
3 Setting of format
4 Automatic, manual selected
<format> 0 Long alphanumeric
2 Numeric <oper>
Read command
AT+COPS?
Response
+COPS: <mode>[,<format>,<oper]
OK/ERROR/+CME ERROR
Parameter
<mode>
See Test command
<format> See Test command
<oper> Network operator
Write command
AT+COPS=<mode>[,<format>[,<oper>]]
Parameter
<mode>
See Test command
<format> See Test command
If <mode> = 1, <format> can only = 2
<oper> In numeric form only
Response
OK/ERROR/+CME ERROR