Specifications

AT Command Set for L55 Platform 2003-11-21
Copyright  Siemens AG 2003 All Rights Reserved Page 42 of 131
2.3.4.15 AT+CPIN
AT+CPIN Enter PIN and query lock
Test command
AT+CPIN=?
Response
OK
Read command
AT+CPIN?
Response
+CPIN: <code>
OK/ERROR/+CME ERROR
Parameter
<code>
READY No further input necessary
SIM PIN SIM PIN input necessary
SIM PUK SIM PUK input necessary
PH-SIM PIN Device code (theft protection) input necessary
PH-SIM PUK Device code PUK (theft protection) input
necessary
SIM PIN2 PIN2, e.g. for editing the FDN book;
only possible if previous command was
acknowledged with +CME ERROR:17
SIM PUK2 Only possible if previous command was
acknowledged with error +CME ERROR:18
device specific codes (SIM LOCK):
PH-FSIM PIN There is no current PIN
PH-FSIM PUK Phone locked to very first inserted SIM
PH-NET PIN There is no current PIN
PH-NET PUK Network Personalization is actually a PUK
PH-NETSUB PIN There is no current PIN
PH-NETSUB
PUK
Network Subset Personalization is actually a
PUK
PH-SP PIN There is no current PIN
PH-SP PUK Network Personalization is actually a PUK
PH-CORP PIN There is no current PIN
PH-CORP PUK Network Personalization is actually a PUK
The required error message can (must) be
provoked by an attempted Write command
Write command
AT+CPIN=<pin>[,<new pin>]
Parameter
<pin>
Password for appropriate lock; if the lock is a
PUK, then a <new pin> is necessary.
<new pin> New password for the lock
Response
OK/ERROR/+CME ERROR