Specifications

AT Command Set for L55 Platform 2003-11-21

1.6.2 Related Standardisation documentation

The following standardisation documents are related to the current document:

[1] Digital cellular telecommunications system (Phase 2+);Technical realization of the Short

Message Service (SMS) Point-to-Point (PP)(3GPP TS 03.40 version 7.5.0 Release 1998)

[2] Digital cellular telecommunications system (Phase 2+);Point-to-Point (PP) Short Message

Service (SMS) Support on Mobile Radio Interface (3GPP TS 04.11 version 7.1.0 Release

1998)

[3] Digital cellular telecommunications system (Phase 2+);AT command set for GSM Mobile

Equipment (ME)(3GPP TS 07.07 version 7.7.0 Release 1998)

[4] Digital cellular telecommunications system (Phase 2+) (GSM);Use of Data Terminal

Equipment - Data Circuit terminating; Equipment (DTE - DCE) interface for Short Message

Service (SMS) and Cell Broadcast Service (CBS)(GSM 07.05 version 7.0.1 Release 1998)

[5] ITU-T Draft new Recommendation V.25ter “Serial asynchronous automatic dialling and

control

[6] Digital cellular telecommunications system (Phase 2+) (GSM); Personalisation of GSM

Mobile Equipment (ME); Mobile functionality specification (GSM 02.22 version 7.0.0

Release 1998)

[7] Digital cellular telecommunications system (Phase 2+); Specification of the Subscriber

Identity Module - Mobile Equipment (SIM-ME) Interface (3GPP TS 11.11 version 8.8.0

Release 1999)

[8] Facsimile Digital Interfaces – Asynchronous Facsimile DCE Control Standard, Service

Class 1(TIA/EIA-578-A), May 1995

[9] Standards Proposal No. 2388, Proposed New Standard “Asynchronous Facsimile DCE

Control Standard” (if approved, to be published as EIA/TIA-592), October 1990

[10] Hands-free Profile (0.96 voting draft, 2001-10-22, by Jesus A. G. Pulido; Doc no.

CAR_x_SPEC/0.96 B1)