Specifications

AT Command Set for L55 Platform 2003-11-21

2.3.12 Bluetooth related commands

This section provides descriptions of commands related to Bluetooth application. AT commands

defined in this chapter are only to be used over a bluetooth connection between mobile and devices

such as Headset or Carkit. This commands are actually specified in the Bluetooth Profile Description

and not in an ETSI specification.

2.3.12.1 AT+VGS (Headset and Handsfree (e.g. Carkit) Profile)

AT+VGS Gain of the Speaker Volume

Test command

AT+VGS=?

Response

Write command

AT+VGS=<vol>

Response

OK/ERROR/+CME ERROR

Parameter

<gain>

0 .. 15

Minimum Gain

Maximum Gain

Unsolicited message

+VGS: <gain>

2.3.12.2 AT+BLDN (Handsfree Profile)

AT+BLDN Redial Last Number

Execute command

AT+BLDN;

Dial Last number!

Similar to ATDL command but only for connection over Bluetooth.

Response

OK/ERROR/+CME ERROR

2.3.12.3 AT+BINP (Handsfree Profile)

AT+BINP Phone number corresponding to the last voice tag recorded in the HF

Test command

AT+BINP=?

Response

Write command

AT+BINP=1

Response

+BINP: <number>, <type>

OK/ERROR/+CME ERROR

<type>

Telephone number

Type of number