Specifications

AT Command Set for L55 Platform 2003-11-21

Table 2-2 lists all the supported GSM 07.05 AT commands in alphabetical order, and indicates the

type of command as defined in the ETSI GSM 07.05 standard:

07.05

commands

Function Type of command Page

AT+CMGC Send an SMS command Message sending and writing 60

AT+CMGD Delete an SMS in the SMS memory Message sending and writing 60

AT+CMGF SMS format General configuration 60

AT+CMGL List SMS Message receiving and reading 61

AT+CMGR Read in an SMS Message receiving and reading 61

AT+CMGS Send an SMS Message sending and writing 62

AT+CMGW Write an SMS to the SMS memory Message sending and writing 62

AT+CMSS Send an SMS from the SMS memory Message sending and writing 63

AT+CNMA Acknowledgment of a short message

directly output

Message receiving and reading 63

AT+CNMI Display new incoming SMS Message receiving and reading 64

AT+CPMS Preferred SMS message storage General configuration 66

AT+CSCA Address of the SMS service center Message configuration 67

AT+CSCB Select cell broadcast messages Message configuration 67

AT+CSMS Selection of message service General configuration 68

Table 2-2: Supported GSM 07.05 commands

Table 2-3 lists all the supported Siemens-specific AT commands in alphabetical order:

Command Function Page

AT+GCAP Request Capabilities List 88

AT+IPR Fixed DTE rate 88

Table 2-3: Supported commands according to ITU-T Recommendation V.25 ter