User guide
Table Of Contents
- Safety precautions
- Overview of the phone
- General instructions
- Getting Started
- Switch on, off / PIN entry
- Security
- Making a phone call
- Phonebook
- Message (SMS)
- WAP
- Voice message/Mailbox
- Cell broadcast
- Records
- Time/charge
- Divert
- Group
- Organiser
- Clock
- BattleMail™ Kung-Fu
- Games
- Profiles
- My Menu
- Fast access key
- Audio
- Setup
- Fax/data mode using a PC
- Display symbols (selection)
- Troubleshooting
- Siemens Service
- Specifications/maintenance
- Accessories
- SAR (European Union)
- SAR (international)
- Index
$
)&
You can display the charge details
and the duration of calls as you
speak, as well as setting a unit limit
for outgoing calls.
#
2
3/
After you have made the charge de-
tail settings, you can display the call
duration/charge details for the follow-
ing call types or you can display the
credit balance.
<
-
or when - is deactivated:
<
-
-/
Select a call type.
Display the data.
When displayed, you can:
Clear display.
End display.
2
1
1
Enter the currency in which the
charge details are to be shown.
(PIN 2 needed)
Enter the charges per unit/period.
-/
(PIN 2 needed)
Special SIM cards allow you or the
service provider to define a credit/
period after which the phone is
blocked for outgoing calls.
' Enter the number of
units and confirm
with .
Then confirm the credit or reset the
counter. The display of Prepaid cards
may vary depending on the service
provider.
-
Switch between the displays.
-/
If your network supports
charge detail display, the current
units are displayed.
If you have set charge details per
unit, the costs incurred are
displayed.
Special registration may be neces-
sary for this service.
-
Call duration/charges are automati-
cally displayed after each call.