User manual

SX66 Phone User Manual
118
SX66 Phone User Manual
119
Settings on your SX66 Phone
You need to complete these actions before you start using the Wireless Modem on your
SX66 Phone:
n A GPRS SIM card is inserted in your SX66 Phone.
n Disable the ActiveSync com port connection of your PC.
n Disable the Infrared function by tapping the Start menu > Settings > the Connections
tab > Beam. Uncheck Receive all incoming beams.
n Insert your SX66 Phone to your PC/Notebook by Serial connection (using the optional
serial sync cable).
1. Tap the Start menu > Programs > Wireless Modem.
2. Select the Serial connection type from the drop-down list and insert the synchronization
cable adapter.
3. Make sure that you have connected your device with a serial sync cable if you choose
Serial connection to a notebook or PC, tap Start.
Now you can start to dial the new dial-up connection you have created by tapping Start >
Settings > the Control Panel > Network and Dial-up Connections on your PC.
Connecting via USB Port
As with the connection via serial or IrDA, you need to check the following below before you
start using the Wireless Modem on your SX66 Phone via USB connection:
n A GPRS SIM card is inserted in your SX66 Phone.
n Disable the ActiveSync com port connection of your PC.
n Disable the Infrared function by tapping the Start menu > Settings > the Connections
tab > Beam, and then uncheck Receive all incoming beams.
n Insert your SX66 Phone to your PC USB connection (using the USB sync cable or
cradle).
Before setting up an USB modem, you must verify that you have the two les, USBMDM
and USBModem_Dialer, on the SX66 Phone Companion CD. Insert the Companion CD
into the CD-Rom of your PC and perform the settings as follows:
1. Tap the Start menu > Programs > Wireless Modem.
2. Select the USB connection type from the drop-down list and insert the USB cable
adapter.
3. Tap the Start button on the Wireless Modem screen of your SX66 Phone.
4. A Found New Hardware message will pop up on your desktop PC.