User manual

SX66 User Manual
176
SX66 User Manual
177
Problem
n Problems with the cable and
cradle connection.
Solution
1 Make sure that your SX66 is turned on.
2 Make sure that you do not have any other active
connections. Tap the Start menu > Today, and then
tap or at the bottom of the screen, and then
Disconnect.
3 Make sure that the cable is securely plugged into
the COM or USB ports on the back of your PC. Use
the cable that came with the SX66 without any extra
cables or extenders attached.
4 Plug the other end of the cable securely into the
correct port on your SX66. If you are using a cradle,
push your SX66 securely into the cradle.