User manual

SX66 User Manual

By default your device detects incoming infrared

(IR)

and Bluetooth beams and prompts you

to accept them. If you do not want your SX66 to detect or receive beams, clear the Receive

all incoming beams check box.

NOTE: If someone attempts to send you an IR beam from an older device, you may not

be prompted to accept it. In this case, before the beam is sent from the other device, tap

Receive an infrared beam at the bottom of the Beam screen.

Bluetooth:

1. Make sure that your SX66 is congured to receive incoming beams.

2. Make sure that your SX66 is turned on, discoverable, and within 10 meters (about 30 feet)

of the other device beaming the information.

3. When prompted to receive an incoming beam, tap Yes to accept the beam.

For more information about Bluetooth and its settings, please see Chapter 6.

4.4 ActiveSync Errors

Whenever ActiveSync cannot successfully synchronize your information, it displays an

error on your SX66.

Viewing error information

Press the Action button when the error text is displayed. ActiveSync will then display more

information about the error that occurred.

Some types of errors can interfere with automatic synchronization. If you suspect that a

scheduled automatic synchronization has not occurred, you should attempt to manually

synchronize your information. Successfully completing manual synchronization will reset

automatic synchronization. For more information, see the Synchronizing Information sec-

tion of ActiveSync Help on your PC.