User's Manual

ManualsBrandsSiemens ManualsElectronicsInductive TAG Reader

5-15

MOBY E Configuration, Installation and Service Manual

(4) J31069-D0105-U001-A5-7618

5.5 SLG 75

The SLG 75 ANT is a read/write device in the middle of the performance

range. It can only be used with ANT 1, ANT 12, ANT 18 and ANT 30. The

antennas can be very easily positioned for any application.

The cable between the antenna and evaluation unit is 3 m long. The length

cannot be changed.

The antenna cable can be connected on the SLG side.

The SLG 75 can be used with the following interface modules:

ASM 400, ASM 410, ASM 424, ASM 450, ASM 452, ASM 454, ASM 470,

ASM 473 und ASM 475.

Figure 5-16 Read/write device SLG 75

ANT 1

Figure 5-17 ANT 1 for SLG 75

The ANT 1 is an antenna in the middle of the performance range which is

very useful in production plants and assembly lines because of its easily han-

dled housing.

The antenna’s dimensions make it possible to read/write large volumes of

data from/to the MDS during operation. The antenna cable can be connected

on the SLG side.

Application

area SLG 75

Areas of

application

of the antennas

Read/Write Devices – Read/Write Antennas

Summary of content (13 pages)

PAGE 1
Read/Write Devices – Read/Write Antennas 5.5 SLG 75 Application area SLG 75 The SLG 75 ANT is a read/write device in the middle of the performance range. It can only be used with ANT 1, ANT 12, ANT 18 and ANT 30. The antennas can be very easily positioned for any application. The cable between the antenna and evaluation unit is 3 m long. The length cannot be changed. The antenna cable can be connected on the SLG side.
PAGE 2
Read/Write Devices – Read/Write Antennas ANT 12 Figure 5-18 ANT 12 for the SLG 75 The ANT12 is intended primarily for tool identification. The very small size of the antenna permits very accurate positioning using the plastic nuts included with it. The antenna cable can be connected on the SLG side. Data carrier communication is only possible with the MDS E623 (tool pill) in static mode. ANT 18 Figure 5-19 ANT 18 for the SLG 75 The ANT 18 was designed primarily for use in small assembly lines.
PAGE 3
Read/Write Devices – Read/Write Antennas Ordering data Table 5-11 Ordering data for the SLG 75 and ANT xx SLG 75 write/read device with RS 422 serial interface The antenna is not included with the SLG 75 and must be ordered separately. 6GT2 398-1AF00 Antennas: ANT 1 ANT 12 ANT 18 ANT 30 75 x 75 x 20 (L x W x H) M12 x 1.0 x 40 (∅ x wght x L) M18 x 1.0 x 55 (∅ x wght x L) M30 x 1.
PAGE 4
Read/Write Devices – Read/Write Antennas Table 5-12 Technical data of the SLG 75 (read/write device) SLG 75 Protection rating in accordance with EN 60 529 IP 65 Shock in accordance with EN 60 721-3-7/class 7M2 30 g1 Vibration in accordance with EN 60 721-3-7/class 7M2 1g 1.5 g Mounting of SLG 2 M5 screws Tightening torque at room temperature 3 Nm Ambient temperature During operation During transportation and storage –25 °C to + 70 °C –40 °C to + 85 °C Weight (approx.
PAGE 5
Read/Write Devices – Read/Write Antennas Table 5-13 Technical data of the antennas Antenna ANT 1 ANT 12 ANT 18 ANT 30 Write/read distance, max. ANT-MDS (Sg) 100 mm 5 mm 15 mm 24 mm Housing, dimensions in mm 75 x 75 x 20 (L x W x H) M12 x 1.0 x 40 (∅ x wght x L) M18 x 1.0 x 55 (∅ x wght x L) M30 x 1.
PAGE 6
Read/Write Devices – Read/Write Antennas Transmission window Transmission window: The antenna of the MDS must be positioned inside this field to ensure reliable data communication. MDS Transmission window Sa Sg Side view Top view L (Sa,max) = Ld L (Sa,min) 1 Figure 5-21 1 The transmission window can be larger at Sa, min.
PAGE 7
Read/Write Devices – Read/Write Antennas Ld L (Sa, min) 1 Ld sg sa Top view Side view Figure 5-23 1 The transmission window can be larger when Sa, min Transmission window of the ANT18 Transmission window Ld Ld sa sg Top view Side view Figure 5-24 Transmission window of the ANT 30 MOBY E Configuration, Installation and Service Manual (4) J31069-D0105-U001-A5-7618 5-21
PAGE 8
Read/Write Devices – Read/Write Antennas Metal-free space Metal-free space with flush mounting a = 40 mm Metal a a a a h = 20 mm (non-metallic base) Figure 5-25 Metal-free space for the ANT 1 MOBYE ANT 12 Top view Side view Note: Flush installation in metal reduces the limit and working distance.
PAGE 9
Read/Write Devices – Read/Write Antennas 20 20 20 MOBYE ANT 30 Side view Top view Figure 5-28 Metal-free space for the ANT 30 FCC information Made in Germany SIEMENS MOBY E SLG 75 FCC ID: NXWMOBYE-SLG75 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES: OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED; INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
PAGE 10
Read/Write Devices – Read/Write Antennas Definition of the distance D Da ANT 1 ANT 1 Db Da > 800 mm Db > 800 mm ANT 1 Figure 5-29 Distance D: ANT 1 Da Db Da 80 mm Db 80 mm The SLG electronics can be mounted directly next to each other. Figure 5-30 Db Distance D: ANT 12 Da Da Db 125 mm 125 mm The SLG electronics can be mounted directly next to each other.
PAGE 11
Read/Write Devices – Read/Write Antennas Da Db Da 200 mm Db 200 mm The SLG electronics can be mounted directly next to each other.
PAGE 12
Read/Write Devices – Read/Write Antennas Dimensions (in mm) 80 40 5 160 5.5 25 Figure 5-33 5 Dimensioned drawing of SLG 75 Cable length 3 m Minimum bending radius: 20 mm 5 20 75 ANT 1 can be connected on electronics side Figure 5-34 Dimensioned drawing of the ANT 1 40 Minimum bending radius: 20 mm M12 Fine thread Gradient 1.
PAGE 13
Read/Write Devices – Read/Write Antennas 55 M18 Fine thread Gradient 1.0 Cable length 3 m Antenna side Minimum bending radius: 20 mm MOBY E ANT 18 24 Antenna head Side view of the antenna head ANT 18 can be connected on electronics side Figure 5-36 Dimensioned drawing of the ANT 18 58 M30 Fine thread incline: 1.