User's Manual Part 2

ManualsBrandsSiemens ManualsElectronicsTag Reader System

5-21

MOBY I Configuration, Installation and Service Manual

(4) J31069-D0033-U001-A8.1-7618

5.6 SLG 42

The SLG 42 is a middle-of-the-line read/write device. With its larger an-

tenna, the SLG 42 generates a much larger field than the SLG 41, and a

greater range can be achieved with the same data memories. In dynamic op-

eration, larger amounts of data can be read from and written to the MDS.

See chapter 3.4.

Figure 5-23 SLG 42 read/write device

Table 5-14 Ordering data for SLG 42

Read/write device SLG 42

up to 70 mm (medium power)

SLG plug connector and stub lines

6GT2 001-0BA00

See chapter 3.10

Table 5-15 Technical data of SLG 42

Inductive interface to MDS

Data transmission speed

Read/write distance

SLG to MDS (max.)

Transmission frequency

 Power

 Data

19200 baud

70 mm (see field data table)

134 kHz

1.81 MHz

Serial interface to ASM 6-pin SLG plug connector in acc. w.

DIN 43651

Transmission speed 19200 baud, RS 422

Line length, ASM to SLG (max.)

at 24 V DC

120 m

Supply voltage (via serial interface)

Nominal value 24 V DC

Permissible range 20 to 30 V DC

Current consumption

Idle/operation 60 mA/180 mA

MTBF 2 x 10

Application area

Ordering data

Technical data

Read/Write Devices

Summary of content (4 pages)

PAGE 1
Read/Write Devices 5.6 SLG 42 Application area The SLG 42 is a middle-of-the-line read/write device. With its larger antenna, the SLG 42 generates a much larger field than the SLG 41, and a greater range can be achieved with the same data memories. In dynamic operation, larger amounts of data can be read from and written to the MDS. See chapter 3.4.
PAGE 2
Read/Write Devices Table 5-15 Technical data of SLG 42 Housing Dimensions in mm (W x H x D) 75 x 40 x 75 Color Gray Material Polyamide 12 Plug connection DIN 43651 Protection rating IP65 Shock 50 g Vibration 20 g Mounting of SLG 4 M5 screws Turning moment (at room temperature) 2 Nm Ambient temperature Field data During operation –25° to +70° C During transportation and storage –40° to +85° C Weight (approx.
PAGE 3
Read/Write Devices ÏÏÏÏÏÏÏÏ ÏÏÏÏ ÎÎ ÎÎ ÏÏÏÏ ÏÏÏÏ ÎÎÏÏÏÏ ÎÎ ÏÏÏÏ ÏÏÏÏ ÎÎÎÎ Transmission window Transmission window at operating distance Length of transmission window (L) Figure 5-24 Metal-free space M M Transmission window of SLG 42 ÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏ ÏÏÏÏÏÏÏ a a = 30 mm Metal-free space with flush installation a a a Figure 5-25 Metal-free space for SLG 42 Definition of distance D D SLG 42 SLG 42 D SLG 42 Figure 5-26 Distance D: SLG 42 MOBY I Con
PAGE 4
Read/Write Devices Dimensions (in mm) 40 6 75 75 65 75 5 5 25 5.5 49 Figure 5-27 5-24 Dimensional diagram of SLG 42 MOBY I Configuration, Installation and Service Manual (4) J31069-D0033-U001-A8.