Data Sheet

Datenblatt Produkt-Service engl 10.04.2001 09:01 Uhr Seite 1
Probedruck
C M Y CM MY CY CMY K
MOBY U identification system with
a read/write range of up to 3 m
SOLUTIONS
Latest Information on MOBY
Greater and greater demands are
being placed on identification
systems in the most varied of appli-
cations for the automotive industry,
logistics and distribution. Large
read/write distances, multi-tag capa-
bility or rapid and reliable data trans-
fer under difficult conditions are
being demanded. Other requirements
are that out-of-range distances and
reflections do not influence the
results of identification, that other
2.4 GHz systems are not subjected
to interference and that little effort
is needed for installation. Mainte-
nance-free operation and simple
system integration are also expected
by users as a matter of course.
In short, a whole series of require-
ments for which there are only a few
solutions.
MOBY U Identification System.
And there are many reasons in its
favour.
By using proven highly-innovative
UMTS/GSM technology from the tele-
communications sector, it became pos-
sible to develop a fast and efficient
solution to the known problems encoun-
tered with conventional 2.4 GHz
systems. MOBY U thus features the
performance capability of innovative HT
technologies and also ensures continui-
ty thanks to its compatibility with the
MOBY I identification system which is
already in use all over the world.
Main uses in logistics and industrial
production
• Main assembly lines in the automotive
industry (bodyshell construction,
paintshop, assembly)
• Vehicle identification/road access
monitoring for haulage companies,
depots etc.
• Containers/pallets/load-carrier
identification in transport logistics and
distribution
• Traffic control systems
• Assembly lines.
World-wide certification
MOBY U has been designed and
certified for heavy industrial use all round
the world. It uses the globally certified
ISM frequency band at 2.4 GHz and its
emission level of < 10 mW is far below
international limits, thus excluding the
possibility of any damage to health.
Simple start-up and years of mainte-
nance-free operation
The use of proven and innovative
UMTS/GSM technologies were the pre-
conditions which enabled the following:
• A homogeneous transmission field
with circular polarization makes antenna
tuning unnecessary.
• Reflections, interference and overreach
are actively excluded.
• Automatic selection of free channels
• Automatic mutual synchronization of
up to 3 write/read units
• Can be directly mounted on metal
• Service functions for rapid fault
analysis