Intelligent modernization of your existing system Make the smart move with Sinteso Move: Bring your fire detection system into the new dimension in fire protection. Answers for infrastructure.
The intelligent move for modernizing your existing fire detection system Often, older systems no longer meet the safety requirements currently prescribed for new installations. As time goes by, they also require increasingly intensive maintenance. Additionally, many factors change within your company – whether products, services, or working methods and procedures. These aspects affect your safety needs, which is why your fire detection system requires a timely modernization.
The new dimension in your fire protection Customized modernization – step by step – Modernization at your own pace – thanks to a three-phase approach with individual steps – Existing products can be reused during modernization, including cables Latest technology – for future-oriented protection – Optimal protection of people’s lives – through innovative safety functions such as redundant detector sensors, integrated turbo isolators, etc.
With Sinteso Move, you can acquire the latest fire detection technology in three phases: Sinteso Move aligns itself with your company’s current fire protection concept. The modernization occurs at your own pace and is based on your available funds. For example, you can replace the detectors step by step.
3 Danger management system Danger management system Switchover of existing loops with Sinteso Move detectors to FDnet Existing loops with Sinteso Move detectors FDnet Replacement with Sinteso control panel Existing fire control panel system. FDnet Existing fire control panel Upgrade to ASAtechnology possible Phase 3: Modernize existing control panel structure with Sinteso. Phase 2: Updating the existing danger management system All detectors on the loop have now been modernized.
Siemens Switzerland Ltd Infrastructure & Cities Sector Building Technologies Division International Headquarters Gubelstrasse 22 6301 Zug Switzerland Tel +41 41 724 24 24 The information in this document contains general descriptions of technical options available, which do not always have to be present in individual cases. The required features should therefore be specified in each individual case at the time of closing the contract. © Siemens Switzerland Ltd, 2012 • Order no.
