Installation Instructions

Siemens Building Technologies, Inc.
8 Fernwood Road • Florham Park, NJ 07932
Tel: [phone] • Fax: [phone]
Web: www.faradayfirealarms.com
P/N 315-099639FA-1 PAGE 1 OF 1
INSTALLATION INSTRUCTIONS AND WIRING FOR
CAT. NO. 12411 SURFACE BOX
(For indoor use only in dry environment)
The 12411 surface box is primarily used for surface mounting remote annunciator units (such
as RDC-2, etc.).
PARTS SUPPLIED
1 12411 Surface box
1 Installation Instruction
Step 1.) Installation is to be done by qualified personnel
who have thoroughly read and understood this
instruction sheet.
Step 2.) Disconnect BATTERY and AC prior to working on
equipment.
Step 3.) Use proper screw size (not supplied) to secure
surface box to a clean, dry, shock-free and
vibration-free surface. Consider the following when
mounting the box:
 Mounting height for visual and manual access
consideration.
 Weight and size of the unit that will use the
surface box.
 Local mounting codes.
Step 4.) Follow the installation instructions of the unit that
will use the 12411 surface box.
Caution: When installing the 12411 surface box, route field
wiring away from sharp projections, corners and
internal components of the unit installed.
12411 DIMENSIONS