Operation Manual

A31003-P3010-U105-16-7619, 03/2014
myAttendant, User Guide 117
Configuration
How to Enable or Disable Dialing by Entering a Name
7.15 How to Enable or Disable Dialing by Entering a Name
Prerequisites
• You are working under Windows.
Step by Step
1) Click on Setup.
2) Click on My Preferences > Miscellaneous.
3) Select one of the following options:
• If you want to enable dialing by entering a name, select thePerform Live
Search check box.
• If you want to disable dialing by entering a name, clear theEnable Live
Search check box.
4) Select one of the following options:
• If you want the LDAP contacts to also be included in the live search when
dialing by entering a name, select the check box Include LDAP contacts
in live search.
• If you do not want the LDAP contacts to be included in the live search
when dialing by entering a name, clear the check box Include LDAP
contacts in live search.
5) Click on Save.
Related Topics
7.16 How to Specify DID Numbers
If myAttendant is shared by a number of different companies, for instance, the
virtual station numbers (IDs) defined indicate which company the call is for.
Prerequisites
• A direct inward dialing number must be set in the communication system for
every virtual station number (DID).
NOTICE: This function should only be performed by a trained
technician.
Step by Step
1) Click Setup.
2) Click on myAttendant > DIDs.
3) Click on Add and enter the virtual station number in the DID Number field and
the relevant company name in the DID Name field.
4) Click on OK, followed by Save.